Humblers (Full Version)

All Forums >> [Community Discussions] >> Bondage Gear and Apparel



Message

welikespice -> Humblers (3/4/2008 8:20:01 PM)

Is there any interest in humblers out there. The last one I bought a few years ago just did not make it for me. My Lady placed on me but I was most disappointed. Lets face my balls and sac just did not get any real tension on them I could almost stand fully. But of course I do hang a bit pardon the directness.
Well I finally have may band saw working and am going to make a few prototypes for a better mouse (oops mean ball) trap.

I will try to keep all informed and if interested will offer some up for sale.

If any one has ideas of things to make them work better, I would like input.

One item is adjustable opening in the middle for around the ball sac. either they are to loose or to small.
Second is adjustable spacing to move the balls further back, great for those wanting some stretching.
Third is a vertical center riser for attaching straps or chains up the back to neck collar.


gosh for a sub I sure would love to try these out on some one, maybe I need to switch. But then if my Lady would just put it on me I would forget all about the other idea.


My ideas also may look to a female version (mind at work needs more wax to stop all the random thoughts)
I will save that for the near future.



Lordandmaster -> RE: Humblers (3/4/2008 8:25:07 PM)

I think it's a good contraption for cucks to wear while they're being forced to watch...otherwise, as a male dom, I don't have too much use for humblers.  But I do salute whoever invented'em.



Leatherist -> RE: Humblers (3/4/2008 8:43:43 PM)

I always wondered if a female version was possible. Hmm, maybe something with an inflatable plug to keep it in........or two.



DungeonDesigner -> RE: Humblers (3/6/2008 8:43:40 AM)

Just made 2 humblers for a woman Domme not long ago......I don't think shes found a victim yet either  lol



LadyLynx -> RE: Humblers (3/6/2008 8:50:27 AM)

I am very interested in humblers,(for male and female.**grins**) a while back I had a sub write to me, saying that he would make me a humbler in return for a couple of sessions, I said I was interested, and then he **poofed** But it spurred my interests.  OP, are you looking to sell them? If so, at prices?



Irishm57 -> RE: Humblers (3/6/2008 9:41:43 AM)

I have made/played with a few humblers. The curved design , which curves around the legs does allow a more upright postion. I found the flat design to be more restrictive. I made mine from red oak and used a hinge pin on one side to lock it. You mentioned "if any ideas" , well i am not sure if these pics of the ones i made help, but was what i came up with.
http://www.slavechris.com/humbler/h.html

Also I came up with my own totally unique design for some , i had left over wood from making portable stocks. I call it the humbler stocks. you can't stand up wearing this.
http://www.slavechris.com/hs/hs.html




frenchdungeon -> RE: Humblers (3/6/2008 9:55:22 AM)

if your building your own HUMBLER, and you find it lacks tension try making your HUMBLER THICKER, try 3" wide or 4", still encassing the curve around the legs for better support, i am sure with thicker wood you will come to some sort of resistance

i made mine from 2" pine wood, in your case try gluing 2 piece of 2" pine together giving you a raher large piece of wood


quote:

ORIGINAL: welikespice

Is there any interest in humblers out there. The last one I bought a few years ago just did not make it for me. My Lady placed on me but I was most disappointed. Lets face my balls and sac just did not get any real tension on them I could almost stand fully. But of course I do hang a bit pardon the directness.
Well I finally have may band saw working and am going to make a few prototypes for a better mouse (oops mean ball) trap.

I will try to keep all informed and if interested will offer some up for sale.

If any one has ideas of things to make them work better, I would like input.

One item is adjustable opening in the middle for around the ball sac. either they are to loose or to small.
Second is adjustable spacing to move the balls further back, great for those wanting some stretching.
Third is a vertical center riser for attaching straps or chains up the back to neck collar.


gosh for a sub I sure would love to try these out on some one, maybe I need to switch. But then if my Lady would just put it on me I would forget all about the other idea.


My ideas also may look to a female version (mind at work needs more wax to stop all the random thoughts)
I will save that for the near future.




welikespice -> RE: Humblers (3/6/2008 4:18:52 PM)

Thank you all for the thoughts. I do find these interesting and easy enough to make, not as much challenge as a bondage table or whipping horse (but they are on my list). But working to make them dynamic and adjustable to meet multiperson use as well as being able to put some good torque on things will please me in my efforts.



bobinchains -> RE: Humblers (3/6/2008 10:01:39 PM)

Keep us posted. What type of wood will you be using?



DungeonDesigner -> RE: Humblers (3/6/2008 10:31:21 PM)

Actually the ones I made for the woman Domme were made from 2 pcs of  1" hard maple and painted semi gloss black using fast drying 12min Krylon   (you can use it in ANY weather because its starts drying the second you spray it )  They looked pretty good!      I love the way that paint looks after about 6-8 coats! It feels like silk : )      btw     I drilled the "hole" after it was cut to shape and sanded and the 2 halves were screwed together and the edges were champered so the hole would be uniform....just a bit hard to figure out a hole size cuz no 2 men are the same size LOL........ I charged her $40.00 each and she was more then happy with them!  Also.....Remember to round off the edges of the hole as well  because it will PINCH if you dont! LOL



AMaster -> RE: Humblers (3/9/2008 4:18:39 PM)

Can't wait to see the female version.



johnfire -> RE: Humblers (3/18/2008 10:35:26 AM)

Also made my own. Still have yet to have it used on me other then when I was doing the fitting. Mine was kinda a test to see if I could do it. next one will be out of red wood or oak. I have seen some with a nice little hinge built in on the inside of the humbler so it is hidden. I want to find one of those. I also put an eyelet on each side for attaching restraints to. I am also looking at a way to add some way of incorporating some cock bondage into it. Maybe a u-bolt or something similar. I am also looking for any ways to make it more interesting. Maybe an eyelet on the front that a chain could be attached to a collar with. 



Jaken8ter -> RE: Humblers (3/19/2008 4:34:41 PM)

the female humbler should be more like a chain connecting to two nipple clamps and allow for the chain to be adjustable to modify the stance...

hmmmm. maybe that would work for both sexes now wouldn't it?

gotta go to the wood shop soon.... Mistress would love a new Easter present



Page: [1]

Valid CSS!




Collarchat.com © 2025
Terms of Service Privacy Policy Spam Policy
0.015625