Collarspace Discussion Forums


Home  Login  Search 

Fucking machines


View related threads: (in this forum | in all forums)

Logged in as: Guest
 
All Forums >> [Community Discussions] >> Bondage Gear and Apparel >> Fucking machines Page: [1]
Login
Message << Older Topic   Newer Topic >>
Fucking machines - 4/27/2008 12:49:17 AM   
thumper27565


Posts: 3
Joined: 10/21/2005
Status: offline 		Im considering building a motor driven fucking device. The model Im following is simular to the intruder on fuckingmachines.comfuckingmachines.com. Has any tried to make a fucking machine. Im curious to know what type of motor was used (rpm/torque)?

Thanks
Profile   Post #: 1
RE: Fucking machines - 4/27/2008 3:32:48 AM   
Irishm57


Posts: 222
Joined: 11/27/2005
Status: offline 		I Made one a few years ago it was in the form of a chair, but it was more like a "it would be fun to make" than a serious "going to make one". I didn't want to spend 7 or 800 on a AC variable freq drive and gear box. I definitly didn't want any pulley type set up, too dangerous unless one builds a big box around it.

I shopped around and bought a 12 volt DC gearmotor from a surplus supply place. They buy and sell odd lots, factory closeouts etc. So thier offerings change on a daily basis, they sell new items, not used equipment. http://www.surpluscenter.com

I had no clue as to how much torque i needed. I mean how do you calculate or measure how much torque it takes to shove something in and out of your ass. So , anyhow. i got sort of lucky the motor i bought was rated at 200 inch lbs. This is marginal when at low speed since the torque at low speed is less. But it worked for my needs. It was 12 volt dc , 12 rpm, 200 inch lbs. The motor was originally made for satilite dishes.
I am not sure on what your plans are, but i can say that 6 to 12 rpm on the output end would be considered in the "slow pleasure range" My ex girlfriend loved it. I would also say the minimum torque should be no less than 300 inch lbs.
I noticed they now have DC linear motors (actuators) in both 6 inch and 9 inch strokes. with a rate of 1/2 inch per second. i might buy one with some of the 600 i should be getting from the irs in 2 weeks lol

The chair i made can be seen http://www.slavechris.com

_____________________________

Some of the toys I have made can be seen at
http://www.slavechris.net

(in reply to thumper27565)
Profile   Post #: 2
RE: Fucking machines - 4/27/2008 3:40:55 AM   
wulfgarw


Posts: 752
Joined: 3/18/2008
Status: offline 		I seem to remember there is a website out there that had plans for 6 or 8 different designs of fucking machines based on various DC and AC motors and actuators, including rotary driven and piston driven designs with various controllers ranging from a simple on/off toggle switch to laptop computer control programs.

But my google-fu fails me tonight...

(in reply to Irishm57)
Profile   Post #: 3
RE: Fucking machines - 4/27/2008 5:43:24 PM   
thumper27565


Posts: 3
Joined: 10/21/2005
Status: offline 		Thanks a bunch, Just the info I was looking for. Now I just need the time to machine the parts out.

By the wasy your stuff on your site is pretty cool keep up the good work.

(in reply to Irishm57)
Profile   Post #: 4
RE: Fucking machines - 4/27/2008 6:44:13 PM   
MadameMajidah


Posts: 89
Joined: 1/25/2007
Status: offline 		I have a Machine.. The Power Box, fits any Vac-U-lock  Attachment...it's actually for sale, as it hasn't been used in nearly a year. But booyyy ohh boyy..when I do get the urge to take it out.. WHOOOOAAAA! *LOL* The perfect partner, it doesn't whine, doesn't get tired, doesn't get leg cramps, and definitely doesn't CUM IN MY HAIR!!!! (LMAO)
~Majidah

(in reply to thumper27565)
Profile   Post #: 5
RE: Fucking machines - 4/28/2008 3:34:04 PM   
Irishm57


Posts: 222
Joined: 11/27/2005
Status: offline 		You know the more i thought of this,, there is an easy way to figure the torque required to push a dildoe or object into an anal cavity.
Being an electrical engineer , i should have thought of this before i did the "got lucky with 200 inch lbs". And i even joked in my post how do you measure torque required for shoving something into the ass...
it isn't that hard. All one needs is a few simple items..

Take a 1 inch diameter dowel, 3 feet long. Drill hole through the center of the length  so it can be screwed to a bench or something, so it can swivel. Mount a Dildoe 1 foot out from pivot point. Take one of those fish scales(the ones  you hold in your hand and hang a fish on) and mount to a hook on the dowel on the opposite end from where the dildoe is mounted. Kneel down and someone pull on the pull on the fish scales, Take the reading while the dildoe is pentrating , preferable at the point in time it you have to pull the hardest.
this will give the force required to push the diildoe into the anal cavity

or If alone drill hole in end of dowel mount to an object so it can swivel, , mount dildoe  1 foot from  swivel point, , mount hook on end dowel for the fish scales , then pull on fish scales, almost the same thing, plus if you keep this set up, you can use it for self pleasure later lol




< Message edited by Irishm57 -- 4/28/2008 3:46:45 PM >

_____________________________

Some of the toys I have made can be seen at
http://www.slavechris.net

(in reply to thumper27565)
Profile   Post #: 6
RE: Fucking machines - 4/29/2008 3:58:53 PM   
ThunderRoad


Posts: 231
Joined: 3/15/2006
Status: offline 		I always thought that a Sybian was the ultimate anyways, at least for women.

(in reply to Irishm57)
Profile   Post #: 7
RE: Fucking machines - 4/30/2008 10:30:13 AM   
MistressElegant


Posts: 4
Joined: 7/23/2005
Status: offline 		I have seen Kitchen Aid mixers used as the base and the basic... machine... develops enough torque.

J

(in reply to ThunderRoad)
Profile   Post #: 8
Page:   [1]
All Forums >> [Community Discussions] >> Bondage Gear and Apparel >> Fucking machines Page: [1]
Jump to:





New Messages No New Messages
Hot Topic w/ New Messages Hot Topic w/o New Messages
Locked w/ New Messages Locked w/o New Messages
 Post New Thread
 Reply to Message
 Post New Poll
 Submit Vote
 Delete My Own Post
 Delete My Own Thread
 Rate Posts




Collarchat.com © 2025
Terms of Service Privacy Policy Spam Policy

0.047