How to make velcro wrist and ankle restraints

How to make velcro wrist and ankle restraints (Full Version)

All Forums >> [Community Discussions] >> Bondage Gear and Apparel

Message

LDsbottom -> How to make velcro wrist and ankle restraints (9/21/2008 11:43:14 AM)
Hi A/all, i am new for the most part to the world of BDSM, but i am coming along nicely i think. i have recently began a relationship with a Lady who is very interested in the world of BDSM, as my Top. She has asked that i make a few devices one of which being some restraints. I found a site that showed how to make velcro wrist and ankle restraints from industrial velcro, unfortuanely i have misplaced that link. Are any of Y/you familiar where i can find the information. Than Y/you all in advance and i look forward to sharing ideas with Y/you all in the future. respectfuly LD'sbottom

ExKat -> RE: How to make velcro wrist and ankle restraints (9/21/2008 12:00:14 PM)
I've never made velcro wrist restraints, but I have made other similar items. Assuming you have some experience with sewing (like, basic knowledge), then the best way that I've found to do things is to find a similar item as close to what you need as you can. Do you have a pair of gloves with velcro closures? Wrist splints? A Velcro bracelet? If you can't find something similar, then find as many online photos as you can to get the sense of the pattern. I might be able to help you out with the general pattern a bit (message me on the other side), since now you've got me intrigued. I might just have to make a set myself. Hmm...

LDsbottom -> RE: How to make velcro wrist and ankle restraints (9/21/2008 1:54:30 PM)
ExKat, thanks for the response, yes any help would definately be appreciated. The build i saw used the 2 inch wide industrial velcro stripping Y/you can find at most any hardware store. It did not need sewing (i can sew , but would rather not). Again thanks LD'sbottom

Diatribe -> RE: How to make velcro wrist and ankle restraints (9/22/2008 9:31:03 AM)
This doesn't exactly answer your question, but I just purchased four nylon workout cuffs I figure that by the time you gather the materials, stitch, etc etc, that buying these would more than make up for it. The wide nylon is great because its easy to clean, doesn't induce sweating, and doesn't leave marks. They're made for weight-lifting, so you know they can take a little thrashing. And they've already got metal rings attached! Great stuff.

SoulRavager -> RE: How to make velcro wrist and ankle restraints (9/22/2008 6:03:26 PM)
home depot sells industrial strength velcro. they also sell something huskey makes which is a strap of velcro attached to a hook-perhaps thats why some people call it dom depot.

LDsbottom -> RE: How to make velcro wrist and ankle restraints (9/23/2008 5:58:58 AM)
Alright, so i did not find the site i was looking for on the industrial strength velcro wrist restraints, however i did manage. As i said in my earlier post my Ladies who i will be playing with instructed me to make a few items for O/our first scene. i figured any sub worth his or her salt would not let any top start any scenes without the proper restraint gear. That in mind i went on a walk about in the local MegaloMart, to my great elation there between isles 10 and 11 on an end cap, i found the holy grail of my current quest. Yes it was an 18 feet roll of industrial grade, 2 inch wide, sticky backed Velcro (for joy). With my newly found prize in hand i spirited away to the check out lanes and made my purchase which set me back a whole 25 bucks...(This is cheaper than alot of restraints of far less quality i have seen for sale) Later i decided to try my hand at making these wrist restraints. i cut 4 pieces of velcro 2 from the rough side and 2 from the softer more wooly side. Carefully pealing back the paper fromt the sticky surface i bonded(heheh bonded) one of the wooly sides to one of the rough sides, in the sticky side to sticky side fashion, behold, i now have a velcro cuff that can be looped around a wrist or ankle. I repeated the same process with the other 2 strips. Now i have 2 cuffs. To join them i cut 2 more strips of about 6 inches 1 from the rough 1 from the wooly , and stuck them together. This cuff i looped between the other 2 cuffs, as a joining point. When i was finished i had what appeared to be a pretty solid very attractive if i may say so myself set of velcro cuffs. Now for the test. i cuffed myself with the restraints and pulled and tugged and twisted , to my great satisfaction (and i am sure to that of my Ladies in the near future) the bonds did not give way but held as tight as those of Sampson to the Philistines Temple's Pillars(well maybe not that tight but it sounded cool). At any rate i have conveyed to you the wisdoms of my under taking in hopes that it will help someone else. i hope also to share more of my adventures and mishaps in the way of (toy) making in the future. LD'sbottom

Page: [1]

Collarchat.com © 2025

Terms of Service

0.015625