Ball/Bit Gags (Full Version)

All Forums >> [Community Discussions] >> Bondage Gear and Apparel



Message


ChastityLocked -> Ball/Bit Gags (12/4/2005 3:52:27 PM)

i was at a store w/ a lot of fetish and bondage supplies, and they had some ball gags, but $30-40 is a little much if you ask me. Ive searched ebay and they are asking about $20 or so for them as well (most are from canada and want $10+ shipping to the usa). does anyone know a good site or sites for ball or bit gags?




trj -> RE: Ball/Bit Gags (12/4/2005 6:34:45 PM)

You could try making your own. I have never found balls the right size in toy stores but some pet toys have balls that are great. Small to medium sized rubber (not plastic) dog bones are also cool. Just tie a leather thong around each end. For the parts to make bit gags--cheaper if you can get to a farm supply place.

trj




subbie333 -> RE: Ball/Bit Gags (12/7/2005 6:21:51 PM)


quote:

ORIGINAL: ChastityLocked

i was at a store w/ a lot of fetish and bondage supplies, and they had some ball gags, but $30-40 is a little much if you ask me. Ive searched ebay and they are asking about $20 or so for them as well (most are from canada and want $10+ shipping to the usa). does anyone know a good site or sites for ball or bit gags?



i make a rubber bit gag: http://www.cometsoftware.com/she/leather_catalog_gags.htm


subbie_333




GIGGLEBOB -> RE: Ball/Bit Gags (12/8/2005 6:42:07 AM)

Subbie you wouldn't also make ballgags at some time in the future would you. I'm from the UK so what would cost mean in £s?




achangedman -> RE: Ball/Bit Gags (12/8/2005 10:17:13 AM)

Really, they are not hard to make. Two types of red rubber balls to consider: the "superball" hard rubber ball must be held in place with a vise and drilled straight through with a high-speed drill setting. If you just try to force a needle through it, it'll turn the needle, possibly injuring your hand. Besides, those balls fracture in little rough-edged pieces.

The other kind of red ball--women look so hot with a red ball in their mouths--is sponge rubber. You've seen this kind since childhood. It should be larger in diameter than 1", but smaller than 2", unless you're planning to orally torture the sub.

1. A large-width needle should be pushed straight through, and that should be fine for moderate-strength people. Thread is run through the needle's eye.
2. Strong string or fishing line is tied to the end of the thread.
3. A leather thong of no less than two fet in length is tied to the end of the fishing line. Before you tie it on, dangle it from both tips to find the midpoint, and mark that point with a marking pen or chalk.
4. Pull the thread through, then the string, then the leather. If you have trouble getting the leather in, poke a pen or knitting needle down through the hole to widen it.
5. Bring the thong through to its midpoint.
6. Make your sub open her mouth.
7. Put the ball gag in her mouth, and tie it behind her head, being careful not to tangle her hair.
8. Snip off the excess thong.
9. Make her recite a poem.

Lipstick or lip balm is a good idea before putting the gag in. They do stretch the sub's lips.




LadyTantalize -> RE: Ball/Bit Gags (12/8/2005 10:29:49 AM)

http://www.velanta.com/pricelist.asp?cid=33 ($10.00 to $20.00 Ball Gags)

http://www.extremerestraints.com/stat/gagball.html?ref=googleadws&kw=ball+gags

http://www.medicaltoys.com/gagsblind.htm ($26.95 Bit Gag)

http://www.stockroom.com/a260.htm ($18.00 to$20.00 Ball Gag)

Tight ball gags make Me a bit nervous, as I've had a sweetie get winded and begin to suck in air, which made her choke a bit on the ball gag. I love love love My bridle bit gags!! $30.00 for a bridle bit gag is a good price, indeed!!!


In My opinion, $20.00 is totally worth the price to purchase a decent piece of equipment. Especially considering it's for the mouth area, which can be a bit sensitive is the leather is thick, bulky, frayed or the rubber used is inadequate. Personally, when it's a toy to go in some person's dear mouth, I'd rather have a nice gag!! Just Me, though.

Truly,

Lady T.

Lady Tatiana Tantalize
Atlanta's Sadistic Southern Belle
http://www.ladytantalize.net







happypervert -> RE: Ball/Bit Gags (12/9/2005 10:58:46 AM)

I made a bit gag from a nylon dog bone (that's nylon, not rawhide) from the pet store. Drill holes through each end and attach shoelaces to tie behind the head. $5

woof woof! heh




keptcaged -> RE: Ball/Bit Gags (12/9/2005 12:41:23 PM)

I'm with LadyTantalize,
JTs Stockroom is great. Very reputable,
but................
I want someone to shove their patent leather pump in my mouth toe first, then hook a short nylon bungee to the spike heel, wrap it around my head and hook the other end to the heel.
Creative?
Inexpensive?
keptcaged




starlaTDM -> RE: Ball/Bit Gags (12/9/2005 7:19:45 PM)

You might want to try http://www.bdsmgear.com or
http://www.bdsm-gear.com all leather gear, power sellers on ebay, and pretty much beats all the other prices and to boot a lifetime guarantee, repair or replacement.




jamesthehumanrug -> RE: Ball/Bit Gags (12/14/2005 1:31:10 PM)

greetings,chastity
happy holidays
i would go to the pet store and ,make my own or a saddle and tac store but this place has the mean price of about $15 bucks
http://www.bionictonic.co.uk/sex_toys/bondage_gags.html
if you make your own at the pet store you got that tough doggy-ball ,with the center hole already in it and round collar leather you can lace thru not unlike real horse bits to force thru the hollow rugged ball, but that dang little center pet-bell drives you bats ,unless you can find a way ,to remove it ,without destroying the whole thing, in the process...
no you cant stuff it with cotton balls either

so you cant stuff your slave in the closet when company comes over so everytime you move and the slave thinks its safe to move also
everybody hears a faint pet bell ringing in the background all the time!
you cant call your guests nuts or
you cant clamp the bell inside together and make a pancake out of it ,either or the slave will swallow it ,and have to stop everything ,and get xrays at the emergency ,to find out where it is, and sift ,thru his caca ,for days, till it comes out.
i know .
i had to do it....
except the bell was gold, so i really had, to find it
and not just chuck the caca and say i looked....
i had a plastic fork and ,a plate of my caca everyday, for 4 days!!,
to shift thru.i could'nt shit like everyone else,
plus i had to go ,thru my own caca.
how do you get clean after that!?
especially ,in front ,of your mistress?....
it's like going ,to bed with your own sneekers-
(if you were me)
what did i say to the emergency room about the smashed bell in my stomach
i said my cat flew at my neck and i inhailed ,
and his bell was flat cause he was on the car ,front dash board
when we had an accident,and,
i was in the front passenger seat,
both of us unhurt,
and we kept going over and over the details ....
it was agony.
i kept saying i know; i can't even believe it myself...( i felt spanish all of a sudden,too...)
finally :the dr had the nerve to ask me if i ate dirt....
i will never go there ,again
gees ,fanabla:
just do your job
so i can get f'outta' here
and get into my shit for crying out loud....
everybody has to be a freakin'-comedian these days i guess.
he should stick to being a quack,
if i ever eat dirt i said
i will let him know, for sure.
theres a guy that needs a ball gag;
i can almost picture it ,to this day, too;
perfect for this chump




TheMistressMandy -> RE: Ball/Bit Gags (12/14/2005 8:32:40 PM)

just something to consider about safety...

any type of material other than silicone cannot be entirely sterilized (i.e., rubber, leather, latex, plastic, etc.). my slave and i ONLY play with silicone dildos, gags, etc. because they can be boiled on the stove in hot water to kill the germs and it does not damage the silicone in any way. it is also soft enough for gags and is entirely hypoallegenic (great for those with mild to severe latex allergies). if you do plan to use gags on anyone, and they are not silicone, you should only use them on the same person and never share them. otherwise bacteria can spread from person to person's mouth, and that would not be a pretty site...

best wishes.




aurora31 -> RE: Ball/Bit Gags (12/15/2005 5:25:19 PM)

Try bound2please.com. Not sure how to do the link thing. Anyway...I have seen the work personally and it is pretty good and a bit gag goes for around $17 if I rember rightly.

aurora




subbie333 -> RE: Ball/Bit Gags (12/20/2005 9:33:59 AM)


quote:

ORIGINAL: GIGGLEBOB

Subbie you wouldn't also make ballgags at some time in the future would you. I'm from the UK so what would cost mean in £s?


At this time i have no plans to make ballgags. But, this and a few other replies in this thread gives me an opening for a few other comments.

As a toymaker, i think it is natural for me to make, research, and, test toys that interest me personally. That makes it more fun for me, and, i think it results in a better "product".

Also, i have an interest in making toys that are different from what is already out there. Sometimes "different" is using velcro instead of buckles (or buckles instead of double D rings), using a different material, being more fair when it comes to pricing. The main objective is to try and find a different niche where my products can be successful.

Sometimes i steer clear of certain toys/devices because of the health concerns of the items and/or the use of it. Most of us are familiar with safety issues related to breath play, bodily fluids, and, joint injuries just to name a few. My reasons can be because i don't know enough about the concern to create, promote, and, sell the product with a clear conscious, or, because i personally believe that something is too dangerous for me to involve others when i don't have any control over the use of something i make and sell.

Many times i have not and will not make something because i have higher priorities than to make a particular product or to learn the skill to make a particular product well.

Certainly i don't think i am unique among toymakers with these thoughts. But, i think that many times the buyers are not aware of the many factors that go into the creation, production, marketing, and, selling of BDSM-related items. Simply, it's not as easy as some may make it look.


subbie_333






subbie333 -> RE: Ball/Bit Gags (12/20/2005 9:40:15 AM)

quote:

ORIGINAL: happypervert

I made a bit gag from a nylon dog bone (that's nylon, not rawhide) from the pet store. Drill holes through each end and attach shoelaces to tie behind the head. $5

woof woof! heh


Even as a toymaker who sells his products, i applaud and encourage people to make their own toys. For some, they get more of a kick out of having something they made themselves, not to mention having saved money. As long as the item is not dangerous (i.e. that nylon dog bone is not toxic in the mouth of a human), then, great.

On the other hand, some folks just have to have their toys look like a professionally made toy. And, some have to have their toys made with a certain material.


subbie_333




dogthing -> RE: Ball/Bit Gags (12/25/2005 8:57:21 PM)

Get a pair of pair of point-nose pliers, undo a thick wire coathanger, slide a length of thick clear pvc tubing over it, then bend it to shape and bend a couple of loops in the ends for tyiog ot to attach to an existing head harness or mask.
Instant custom bit-gag, and you can make more creative shapes than the ready-made ones.

DIY shops sell PVC tubing in different gauges for people who do home brewing etc.

Clear PVC tubing is also useful for home made harnessing, you can slip it over a section of cord or length of chain as a protective sleeve. Stops the section of cord or chain cutting into the skin or marking, makes things slightly more hygienic, doesn't spoil the look.
If you have trouble threading cord or links through a section of tubing, pass some string through the tube first, tie it to the cord or chain, then use the string to pull it through.




addcted2it -> RE: Ball/Bit Gags (12/26/2005 10:18:15 AM)


quote:

ORIGINAL: ChastityLocked

i was at a store w/ a lot of fetish and bondage supplies, and they had some ball gags, but $30-40 is a little much if you ask me. Ive searched ebay and they are asking about $20 or so for them as well (most are from canada and want $10+ shipping to the usa). does anyone know a good site or sites for ball or bit gags?


For an inexpensive, do-it-yourself ball gag, go to a toy store or pet store and buy a rubber ball, one that is small-enough to fit inside the mouth, and medium to soft in texture. Then get an awl from a tool or hardware store. Last but not least, a rawhide shoe lace, a wire coathanger and some duct tape. Puncture the ball all the way though with the awl, being careful not to jab your hand in the process. Tape one end of the rawhide strip to the end of the unbent coat hanger and force it through the hole in the ball. You might have to use some soap to work it through. When you have pushed in halfway though, remove the coat hanger and put a knot on each side of the rawhide right where it sticks through the ball so that it won't retract back into the ball when in use. Now the ball fits in the mouth and the strip of leather ties around the back of the head. There you have a cheap, easy-to-construct ball gag.

Note: Some people suffer from what is commonly known as a "gag reflex." This can be dangerous if the person being gagged is not supervised.

- addcted2it




HoosierScorpio -> RE: Ball/Bit Gags (1/2/2006 6:24:25 AM)

I like to make my own stuff and there are some great how sites out there. Sartan and frugal Domme has allot of good projects you can make yourself. Some good toys stories are local pet stores they have some better rubber balls than what they sale at the Adult stores. I have bought my own balls for around 3 dollars or 4 and all you got to do is either freeze it so you can drill a hole in it or take it and put it in a handkerchiefs. I also have bought my own rubber horse bit gag for 10 dollars at the local Tack shops or Farm supllie company. Happy Toy making Hoosierscorpio




Page: [1]

Valid CSS!




Collarchat.com © 2025
Terms of Service Privacy Policy Spam Policy
3.100586E-02