Collarspace Discussion Forums


Home  Login  Search 

Suggestions for making something like this


View related threads: (in this forum | in all forums)

Logged in as: Guest
 
All Forums >> [Community Discussions] >> Bondage Gear and Apparel >> Suggestions for making something like this Page: [1]
Login
Message << Older Topic   Newer Topic >>
Suggestions for making something like this - 11/28/2008 9:26:03 PM   
BlackSakura


Posts: 131
Joined: 7/23/2006
Status: offline 		Does anyone have any suggestions for making or creating something such as this:
http://www.extremerestraints.com/the-trap-bondage-device_1773.html

Basically, I need something for restraining a guy in a position such as this that’s not going to cost 600 bucks!



_____________________________

Before you criticize someone you should walk a mile in their shoes. That way, when you criticize them you're a mile away, and you have their shoes!
Profile   Post #: 1
RE: Suggestions for making something like this - 11/28/2008 9:33:37 PM   
hopelessfool


Posts: 988
Joined: 7/29/2005
Status: offline 		get an ab  lounge and cut out the mesh bottom and add some padding and viola. nearly like it for less. or get 4 peices of wood add padding and comfey fabric use a staple gun to attach... and a peice for the back cut a large enough neck hole for the person id say their neck size plus 3 or so inches...screw in eye hooks by some chain. use cuffs and drill slots to hang the legs over the top of it instead of through with either rope or teathers.=\
i really cant suggest more until you tell me price range and available tools.


_____________________________

" I have nothing left to give, I have found the perfect end, You remain to make it hurt, disappear in to the dirt, carry me to heavens arms.....Dear Agony Just let go of me, suffer slowly, is this the way its gotta be, Dear Agony...."

(in reply to BlackSakura)
Profile   Post #: 2
RE: Suggestions for making something like this - 11/28/2008 11:00:24 PM   
MsLadySue


Posts: 2254
Joined: 12/18/2004
Status: offline 		Get a piece of plywood to use at the head of your bed. Screw in some O-rings spaced across the width.
Attach rope or chain. Put cuffs on your boy and attach the rope or chain as appropriate. You could even use a spreader bar attached with chain or rope to two of the rings for the boy's legs to go over.

_____________________________

In order for you to insult me, I would first have to value your opinion.
I love it when someone insults me. That means I don't have to be nice anymore.

(in reply to BlackSakura)
Profile   Post #: 3
RE: Suggestions for making something like this - 11/30/2008 10:10:56 AM   
stef


Posts: 10215
Joined: 1/26/2004
Status: offline
quote:

ORIGINAL: BlackSakura

Does anyone have any suggestions for making or creating something such as this:
http://www.extremerestraints.com/the-trap-bondage-device_1773.html

Basically, I need something for restraining a guy in a position such as this that’s not going to cost 600 bucks!

Holy crap, I can't believe they actually charge $650 for that.  You could buy a 3/4" sheet of MDF and a handful of hardware for less than $50 and make two of these.

If you don't want to go the Bob Vila route, wrist cuffs and thigh cuffs with a spreader bar would do accomplish the same thing.

~stef


_____________________________

Welcome to PoliticSpace! If you came here expecting meaningful BDSM discussions, boy are you in the wrong place.

"Hypocrisy has consequences"

(in reply to BlackSakura)
Profile   Post #: 4
RE: Suggestions for making something like this - 11/30/2008 10:58:02 AM   
ExKat


Posts: 300
Joined: 8/25/2008
Status: offline 		  Also, erm, rope. Although it might not be as comfortable, it'd be relatively simple to tie someone not too differently than that. Less than $5.

_____________________________

~*~ The amalgam of Exquemelin and Katie978~*~
In the forums, it'll usually be Katie you're speaking to.
testing
"That's the plan/ Rule the world/ You and me/ Anyday ::wink::"

(in reply to stef)
Profile   Post #: 5
RE: Suggestions for making something like this - 11/30/2008 12:53:53 PM   
Irishm57


Posts: 222
Joined: 11/27/2005
Status: offline 		You could make half a set of stocks, attach eye bolts to the top, then attach a chain from them to thighcuffs just above each knee.

If a something more rigid is needed then replace the chains with something like a spreader bars , rigidly attach 2 spreader bars to the stocks to replace the chains.
one 8 foot 2X10 , hinge and hasp isn't that costly.

something like this
http://www.slavechris.com/halfstocks/halfstocks.html


_____________________________

Some of the toys I have made can be seen at
http://www.slavechris.net

(in reply to ExKat)
Profile   Post #: 6
RE: Suggestions for making something like this - 11/30/2008 8:36:16 PM   
OneMoreWaste


Posts: 910
Joined: 8/24/2008
Status: offline 		Find a handy sub who would be willing to build one in exchange for spending some time in it? 

Otherwise, a collar with rings on either side, used to hold the wrists by the neck.  Rope to secure the knees to the elbows. More rope to pull the ankles towards the wrists.

Or, spreader bar behind the knees, with rope or cuffs used to pull the knees towards the end of the bar. Pull it back towards a leather chest harness or upper-body shibari.

Lots of other possibilities depending on exactly how immobile you want it to be, how much access, and what you have to work with...


_____________________________

-and the few still remember passion over rage-

(in reply to Irishm57)
Profile   Post #: 7
RE: Suggestions for making something like this - 12/6/2008 7:53:13 PM   
Aszhrae


Posts: 1030
Joined: 3/31/2008
Status: offline 		The device that BlackSakura asks for suggestions to build, is of a simple design and construction. It would be easy enough for girl to construct but dependent upon the material that were available.
One could easily take a child's bed and add two arms to the foot of the bed and stocks to the arms. Setting up the chains would be just as easy.
Girl just took one look at the device and has already taken it apart.
Something more of challenge would be some of the devices found on the site InfernalMachines.

(in reply to OneMoreWaste)
Profile   Post #: 8
Page:   [1]
All Forums >> [Community Discussions] >> Bondage Gear and Apparel >> Suggestions for making something like this Page: [1]
Jump to:





New Messages No New Messages
Hot Topic w/ New Messages Hot Topic w/o New Messages
Locked w/ New Messages Locked w/o New Messages
 Post New Thread
 Reply to Message
 Post New Poll
 Submit Vote
 Delete My Own Post
 Delete My Own Thread
 Rate Posts




Collarchat.com © 2025
Terms of Service Privacy Policy Spam Policy

0.063