A home made toy stockade

A home made toy stockade (Full Version)

All Forums >> [Community Discussions] >> Bondage Gear and Apparel

Message

Irishm57 -> A home made toy stockade (4/25/2009 1:31:34 PM)
For those that like making toys. I saw this thing they called a stockade, and thought it was cool. So i ordered one and well , don't want to go into it, but it was one of those "it will ship tomrrow" , so after 3 or 4 of those promises i canceled my order. The one i am thinking of is, really a small frame that keeps a person on all 4's. like a foot stool lol So i decided to hit the home depot pipe section and spend 55 bucks. and bought some pieces of pre threaded 3/4 inch pipe. And tossed it together in 2 hours. the hardest part of making it is drilling holes in the 5 pipe caps for the eye bolts. Other than needing a drill, just a pipe wrench or 2 ,,, and done I just thought i would share another simple home made toy for those that like to make their own (parts list on the page) http://www.slavechris.com/stockade/stockade.html

BohemianGoddess -> RE: A home made toy stockade (4/26/2009 8:01:51 AM)
I'm impressed, you did a great job making this for so little money, ingenious of you chris. I want one!

strangedesire -> RE: A home made toy stockade (4/26/2009 9:11:20 AM)
Ingenious. I may have to plan a trip to Home Depot.

GYPZYQUEEN -> RE: A home made toy stockade (4/26/2009 9:16:20 AM)
chris..this is great.. I am putting my boy tim to work this weekend... ty for you creativity,,,, you go boy

VadFarkas -> RE: A home made toy stockade (4/26/2009 11:13:14 AM)
A thumbs up as usual.

bayareaguy707 -> RE: A home made toy stockade (4/26/2009 5:57:52 PM)
Good job - I had the same idea but was not sure what to do about the neck post. Didn't like the idea of a post for the neck. Was wondering if just a chain was safer. Not even sure if it mattered. Also, was wondering if a brace for the chest would be good for longer restraints. Some professionally made have small pads. The idea I had for the end posts with eye bolts was like you did with pipe caps or as a non drill alternative was to use a couple washers and pipe reducers. That should be enough to prohibit movement from the restrained person. Was also considering making it out of wood but like pipe better – have a big idea about a whole interchangeable restraint system using pipe but haven't had a chance to fabricate it yet. Lastly, was looking at a dildo holder attachment like the professional type. Some ideas were found on the net but nothing I liked. Can't find a cross fitting in anything but pvc. Keep up with the DIY ideas. I usually kill threads when I post a comment – so I'll apologize if my curse continues.

Irishm57 -> RE: A home made toy stockade (4/27/2009 2:30:19 PM)
After the weekend i had thought about taking the 8 inch pipe for the collar attachment and just using a close nipple instead. this would lower the pipe cap and eye bolt to 1 or 2 inches. for the chest pad, one could just take and add another TEE inline right behind the neck post one, put an 8 or 12 inch pipe in it, on top of the pipe screw ona 3/4 inch pipe flange. they have 4 holes in them. Then just make a pad with a would base and screw it to the flange. The dildoe attachment is also not that hard to do. Ah yes another tee.. put a 12 or 18 inch pipe in . So the tee is facing upward. then use a version of a dildoe mount to attach a dildoe to the upright pipe. http://www.slavechris.com/DildoeMount/Mount.html And use 2 pieces of threaded rod instead of one with a turn buckle inline to make the length somewhat adjustable . i have seen 6 inch turn buckles in home depot

Irishm57 -> RE: A home made toy stockade (5/4/2009 2:26:43 PM)
Abrief note, i went to home depot and got some more pipe, and added the padded rest. Some use a rectangle from what i have seen. And actually after putting it all together, found it very uncomfortable. It puts all the upper body weight on a small area on the chest. i found that removing the padded rest and letting the sub rest on their arms better for long term.

Dawgus -> RE: A home made toy stockade (5/16/2009 5:06:06 PM)
I am defintly making one of those! Ughhhhh I never thought of that, and I'm a PIPEFITTER! I've made nearly all of our own gear as well, I always love new ideas. Currently I am working on a vault-horse attachment for a multi-stand I made several years ago.

LUCKY76 -> RE: A home made toy stockade (11/20/2013 7:31:42 PM)
Does anyone have the break down on how this stockade was built or a sheet of what is needed to build it.. The link on here is no longer good. Thank you I really would like to build one , but some direction as to what other people have learned good and bad would help

MasterCaneman -> RE: A home made toy stockade (11/20/2013 11:16:27 PM)
Don't respond to posts more than three months old-if you want to ask a question, refer back to this in a link. The mods'll be along to lock this one up shortly. Start a new thread with your question, it'll provide better answers anyway.

Irishm57 -> RE: A home made toy stockade (11/24/2013 12:36:56 AM)
Lucky, i am having a slight issue with the company i registered that .com domain with,, they sort of disappeared try http://www.slavechris.net/

shadowborn61 -> RE: A home made toy stockade (11/24/2013 8:17:06 AM)
thanks for fixing the link You have some very interesting stuff.

Page: [1]

Collarchat.com © 2025

Terms of Service

0.046875