Another new home made toy- FlexiStocks (Full Version)

All Forums >> [Community Discussions] >> Bondage Gear and Apparel



Message


Irishm57 -> Another new home made toy- FlexiStocks (5/14/2009 5:25:04 PM)

After i made the "stockade" out of blackiron pipe, i thought i make too many things with one purpose. This thought came to me after i was going to finish my wood stocks.

If you don't like my posts on home made toys,, sorry but i am proud of this one.

So i had this off the wall idea , precut pipe is easy for most to work with. So i first made a a black iron pipe frame with 2 purposes. An upright stocks. Then i figured out add a movable bar, and it could be turn to a "forced kneeling" stocks. After i Built that ,, i thought make it portable, or easy to disassemble to hide under the bed or in a closet just add 2 unions. Breaks apart in 3 pieces.

So after i made that, i thought that was dumb, just add a few pipe clamps and threaded eye bolts and you get 4 or 5 or more functions from one restraining device. I thought of 5 the first weekend.. Upright stocks, kneeling stocks, plain upright bondage frame, all fours stocks, and a spanking horse..

Estimated cost depending on your needs and additions is 100 to 130 or more. i am going by the local cost at Home depot.  The aluminum for the yoke was 10 bucks alone. So cost will vary.. Parts list for "as shown" in 3/4 inch pipe is listed

The current design as shown is for light to meduim play. for heavier play you need to use 1 inch pipe instread of 3/4 . And of course that increases the cost.
It also doesn't show the corner braces ,, maybe net week i will take pics of it with them but just 4 more pipe plamps, and a foot of pre drilled metal strips.

Oh and if you say , why did i use the tees on the lower legs below the unions, , well when i first was building it i had them left over from the  stockade.  Why waste when i had it already.. you can omit the tees right below the unions and above the feet. Also i thought i might need to add a length of pipe there to stretch the arms out further for the spanking stock position but i am not sure if that is needed. but it shows how to add a tee or 2 for more extensions.

http://www.slavechris.com/flexistocks/flexistocks.html







GeekFreak -> RE: Another new home made toy- FlexiStocks (5/14/2009 6:28:26 PM)

Very cool. If I ever get less lazy I may try and make a one or more of the things you've put up on the boards.




hardbodysub -> RE: Another new home made toy- FlexiStocks (5/14/2009 9:17:09 PM)

Nice item, don't like the name. Because they are totally rigid when assembled, I don't think "Flexi" is a good prefix. "Versi" perhaps is a better descriptor of the device. It is versatile because of the various configurations, but it is not flexible at all.




NickFlogger -> RE: Another new home made toy- FlexiStocks (5/25/2009 10:55:53 AM)

Nice devices! I think a fertile imagination and a Home Depot can be a bondage device wonderland. I too like "multi-function". Good work!




Page: [1]

Valid CSS!




Collarchat.com © 2025
Terms of Service Privacy Policy Spam Policy
0.015625