Hemp / jute rope...treatment and length (Full Version)

All Forums >> [Community Discussions] >> General BDSM Discussion



Message


fozzie -> Hemp / jute rope...treatment and length (4/1/2006 9:28:29 PM)

After hearing different opinions on the subject, i'm curious as to the best way of treating natural fibre rope.  Currently i'm looking at whipping the ends with non-wax dental floss and then boiling, oiling and burning off stray 'hairs'.

Also - what lengths do different folk find the most useful?

Ty for any feedback,

fozzie




NickInSLC -> RE: Hemp / jute rope...treatment and length (4/2/2006 12:33:49 PM)

I don't use Jute, so I can only talk about Hemp rope.  But the technique I use is to boil for 2 hours, stretch my rope out to dry, and burn off the fuzzies, at which point I can be done, or go the extra step of rubbing in oil.  I usually use a very small amount of petroleum jelly.  I know people who use mink oil, and supposedly, there's some hideously expensive seed oil that's more authentic.

You can also substitute boiling for soaking, you soak the rope for 10 days, changing the water daily.  I did that once and decided that I'm just not that patient.




fozzie -> RE: Hemp / jute rope...treatment and length (4/2/2006 7:07:52 PM)

How did you treat the ends of the hemp?  (To prevent unravelling.)




mnottertail -> RE: Hemp / jute rope...treatment and length (4/2/2006 8:16:32 PM)

hemp cost money

get the bitch in hand with closeline (that is about 3 bucks a hank)

take a magic marker and measure the tie.........
that works for her, that works for me......
I wouldn't grab hemp rope for any off the counter whore, she has gotta stick, it is a long road there...........if you are in love, flax rope is the way to end the thing.


LOL,
Ron




mnottertail -> RE: Hemp / jute rope...treatment and length (4/2/2006 8:19:27 PM)

whipping can't be beat for the ends
waxen dental floss..........lol
that dont matter
keep it right................

LOL, you fuckers
Ron




sultryvoice -> RE: Hemp / jute rope...treatment and length (4/2/2006 8:21:07 PM)

I have had people I know use tool dip..Works very well for the ends..

Respectfully,
sultry




LuckyAlbatross -> RE: Hemp / jute rope...treatment and length (4/3/2006 5:58:12 AM)

I just buy from twistedmonk.com, their ends are already prepped and wrapped. :) 




NickInSLC -> RE: Hemp / jute rope...treatment and length (4/3/2006 8:41:44 AM)

I tie knots in the ends of my rope.  Usually a Mathew Walker knot, as it's unique.  If you want to tie Turk's Heads, I would reccomend stacking two or three together.  A single Turk's Head is very common.

Also, with regard to length, the lengths I use the most are 12 foot and 30 foot.  For full body harnesses, I'll use 50 foot quite often.  A good rule of thumb is, the thinner your rope, the longer you'll need so you can use more wraps.  I use 6 and 8 mm rope.  To me, anything else is impractical for general bondage.




Page: [1]

Valid CSS!




Collarchat.com © 2025
Terms of Service Privacy Policy Spam Policy
0.03125