Electric Jack or extension device

Collarspace Discussion Forums

Home Login Search

Electric Jack or extension device

View related threads: (in this forum | in all forums)

Logged in as: Guest

All Forums >> [Community Discussions] >> Bondage Gear and Apparel >> Electric Jack or extension device

Page: [1]

Message

<< Older Topic Newer Topic >>

Electric Jack or extension device - 4/25/2010 6:54:03 AM

Oberonrex

Posts: 164
Joined: 3/31/2005
Status: offline

Finishing up a project, a special bondage/electric chair, and would like to add a jack or other extension mechanism to it to raise/insert plugs. Looking at one for anal, one for vaginal. Experimented with a pneumatic jack, but the air source for it was a bit too much: immediate full extension and no slow rise (want controllable, not launch to orbit), spewing of internal oil, etc. Mechanism needs to be small, about the size of a regular pneumatic car jack, so two can fit in the space. Any thoughts?

Profile

Post #: 1

RE: Electric Jack or extension device - 4/25/2010 7:30:23 AM

Irishm57

Posts: 222
Joined: 11/27/2005
Status: offline

You might want to try something like this if you have some basic wiring skills. they are kind of pricey (100 bucks) but they are very versitile.
i bought 2 for my bondage chair but havent had time to install them

https://www.surpluscenter.com/item.asp?item=5-1577-8&catname=electric

< Message edited by Irishm57 -- 4/25/2010 7:31:01 AM >

_____________________________

Some of the toys I have made can be seen at
http://www.slavechris.net

(in reply to Oberonrex)

Profile

Post #: 2

RE: Electric Jack or extension device - 4/25/2010 7:39:28 AM

Oberonrex

Posts: 164
Joined: 3/31/2005
Status: offline

That looks most interesting, thanks!

(in reply to Irishm57)

Profile

Post #: 3

RE: Electric Jack or extension device - 4/29/2010 5:36:50 PM

baddog123

Posts: 32
Joined: 5/15/2004
Status: offline

Here is something I "whipped" up when I was bored....

I was inspired by reading the writings of a friend, and a bit bored hanging around in my shop, so I began a project to make a spanking bench, of sorts. I did some looking around the Internet for ideas.
I rummaged around looking for a suitable frame or chassis for the bench, considering wood, or steel, when I came across some Unistrut steel. This is kind of a "U "shaped channel, with bolt slots on one face, and a track on the open part of the "U" that will accept a special rectangular nut plate. The plate inserts into the open side of the track, and before it is tightened, can slide adjust to position on the track. Tighten the bolt, and it clamps securely into the track.
I made some attachments made to secure the elbows and knees in, with track nuts to adjust how far they "spread" on the track. For now I have some straps or rope to secure the subject properly to the frame. I will add some nice built in leather ones when the appropriate scrap leather becomes available. Some padding would a nice touch for good girls.
Then I came to the thought that I may get tired from all the "things" I could do with such a rig.
If I needed to take a break to rest, my subject may loose interest, or doze off, so I made a motorized attachment. It has a small DC gear motor that runs from 12 or 24 Volts. With a spring loaded switch to reverse the polarity it will run in either direction. I think I will add a speed control to it, as they are an easy project. It would be a simple matter to wire this to the output of a security camera with a web server, using the pan and tilt control outputs.
I'll post more when I get a chance or make any notable improvements.
http://s369.photobucket.com/albums/oo135/TheTinkerer/
Guess I have too much time on my hands...

(in reply to Oberonrex)

Profile

Post #: 4