How to add stirrups to a massage table?

How to add stirrups to a massage table? (Full Version)

All Forums >> [Community Discussions] >> Bondage Gear and Apparel

Message

LongIslandTop -> How to add stirrups to a massage table? (7/2/2010 4:44:45 AM)
I have a high quality massage table and would like to add a set of stirrups to it. Does anyone have an idea of where I can find a set which can clamp onto it or perhaps stand alone under/next to the table?

ketsueki -> RE: How to add stirrups to a massage table? (7/2/2010 1:16:26 PM)
If you can do metal craft you can easily add a set to slide in under the table that is permanetnly mounted they might not be the prettiest things but all the stirrup is really ia a closed off U attached to a longer piece of rod that slides in and out. Add a couple of knobbed screws to hold it place in the position your using it in. Altenatively ebay is your best friend just look up gyno equipment and you will probably find a freestanding set or maybe some stirrup parts that could be addapted tou your table.

bdspirit -> RE: How to add stirrups to a massage table? (7/3/2010 10:36:10 AM)
I did something similar except it was with an adjustable weight bench. Needed to be able to take it all down and then set it up. Found some older used stirrups on e-bay which were full foot, ankle, thigh molds along with metal rods and an adjustable ball/socket (versus the foot/ankle design now more in use). I found that the challenge came in building the attachment point that allows these to be inserted and locked in place. This was allot of work - there is more torque at the end of these that you think - especially when the sub starts kicking. I finally designed something that works well and it's one of our favorite devices - comfortable, confining, escape proof. Good luck.

Page: [1]

Collarchat.com © 2025

Terms of Service

0.03125