How to make a tail plug?

Collarspace Discussion Forums

Home Login Search

How to make a tail plug?

View related threads: (in this forum | in all forums)

Logged in as: Guest

All Forums >> [Community Discussions] >> Bondage Gear and Apparel >> How to make a tail plug?

Page: [1]

Message

<< Older Topic Newer Topic >>

How to make a tail plug? - 1/25/2011 7:33:18 PM

budlystudly

Posts: 2
Joined: 11/25/2009
Status: offline

Sooooo I want one of these www.schmexy.com on a butt plug. Advice?
What kind of adhesives or hardware to make it work?

I figure a plug is the best use for a fur tail. Any other ideas?

Profile

Post #: 1

RE: How to make a tail plug? - 1/26/2011 10:47:35 AM

lisub4one

Posts: 94
Joined: 6/9/2006
Status: offline

i agree a plug would be the best basis for building the tail as no harness would be required for retention. i've always found Barge cement to be the strongest and most long lasting adhesive for use on leather, and that is what comprises the end of an animal tail. Just need to test a small dab on the end of the plug to make sure it doesn't react to the cement, then apply a thin coat to both the end of the tail and the end of the plug, let them both dry fully, then another thin layer to either plug or tail, and clamp them together until the cement drys. Just watch the orientation of the tail on the end of the plug to make sure it will hang the way you want it to when the plug is in place.

(in reply to budlystudly)

Profile

Post #: 2

RE: How to make a tail plug? - 2/1/2011 2:31:04 PM

BlackDom317

Posts: 2
Joined: 2/1/2011
Status: offline

You could always install a small ring(Think key ring) at the base of the plug and attach the tail to the plug that way. It's what I'd look at doing first if I was making something like that. Rather than an adhesive that could loosen the more it's sat on/pulled on.

(in reply to lisub4one)

Profile

Post #: 3