instructions to build a humbler? (Full Version)

All Forums >> [Community Discussions] >> Bondage Gear and Apparel



Message

humiliatemeuk198 -> instructions to build a humbler? (2/19/2011 2:30:25 PM)

hi everyone

ok i've seen many humblers online and always for a lot of money considering it is basically just two bits of wood, so i was woundering if anyone knew where i could find instructions on building my own?

i know you can make one with chopsticks and rubber bands but i'm looking at making a proper one the only thing is i don't know what length, the type/radius of the curves etc... to put in it?



johnfire -> RE: instructions to build a humbler? (2/19/2011 2:37:48 PM)

I made mine by just estimating the curves. The length was also a rough estimation. Thickness and the hole size was done by trial and error, took a basic measurement off of a ball weight and then changed it till it worked. That one I made out of pine, but am getting ready to start on one made out of oak. If you need I can take measurements.



humiliatemeuk198 -> RE: instructions to build a humbler? (2/19/2011 2:42:31 PM)

i would be very gratefull if you could take measurements, maybe a little rough diagram or something with measurements on it? would be awesome if you could do that



johnfire -> RE: instructions to build a humbler? (2/19/2011 7:12:14 PM)

Ok, I will do that, it will be sometime monday for me due to work.



Nanako -> RE: instructions to build a humbler? (2/19/2011 8:14:05 PM)

Haii all.

I've never heard this term "humbler" before.
Would anyone mind explaining what it is/does ?



Buzzzz -> RE: instructions to build a humbler? (2/20/2011 5:45:55 AM)

for nanako.......... http://en.wikipedia.org/wiki/Cock_and_ball_torture_(sexual_practice)#Humbler



hlen5 -> RE: instructions to build a humbler? (2/20/2011 9:46:31 AM)

From the link provided I learned a new word today. "Tamakeri".



humiliatemeuk198 -> RE: instructions to build a humbler? (2/20/2011 11:35:24 AM)

thanks, that'll be great and give me a project for the next week! just out of interest am i right in my assumption that it won't really take long to build?



johnfire -> RE: instructions to build a humbler? (2/22/2011 7:59:06 AM)

Sorry it took me an extra day to get done measuring it all. Again take this and make adjustments as you need it, this one ended up with a lot of changes from my initial sketch that I made to the finished product. Same using different materials requires changes as well. The next one that I am making out of oak will be locking, have hinges, and will be much thinner than this one which is made out of pine. This was originally a project to see if I could do it and have it come out decently.

Total length is 16 1/2 inches
Total height is 2 3/8 inches
Total width is 2 1/2 inches with each half at 1 1/4 inches (when i do this in oak it will only be about 2 inches wide)
Total weight is 1 lb 2.6 oz US

If you can't make out any of the measurements on the drawing let me know and I will add them in here later.



[image]local://upfiles/292987/93A3BF425C2D4E8ABF55F7081EA2A1D8.jpg[/image]



johnfire -> RE: instructions to build a humbler? (2/22/2011 8:07:29 AM)

Here is a picture of it with multiple angles.

[image]local://upfiles/292987/8C9AE9C12C744C6DBAC150D728D0496B.jpg[/image]



humiliatemeuk198 -> RE: instructions to build a humbler? (2/22/2011 11:48:17 AM)

very well done mate, you've got some good wood work skills



kyblu4U -> RE: instructions to build a humbler? (3/6/2011 8:35:24 PM)

That is very nice indeed!  Kudo's on the Wood skills!

I've been thinking about making one myself .. Hope it comes out as nice as yours



johnfire -> RE: instructions to build a humbler? (3/7/2011 5:10:08 PM)

Thank you, I hope that the things I learned making this helps for your project. After a move I am just getting the tools that I wanted for my shop and the weather is getting better. So I will be working on my new humbler which will be made out of red oak, and will have a hidden hinges and a lock. I should be starting in another week or two on it. Will post as it goes. Always up for helping another kinky fabricator.



Page: [1]

Valid CSS!




Collarchat.com © 2025
Terms of Service Privacy Policy Spam Policy
0.03125