Fucking Machines (Full Version)

All Forums >> [Community Discussions] >> General BDSM Discussion



Message

cookiecrumble -> Fucking Machines (8/21/2011 11:52:14 PM)

Looking to buy a fucking machine but obviously want one that is worth buying. Recommendations please.



blacksword404 -> RE: Fucking Machines (8/21/2011 11:55:29 PM)

You could make your own. It's cheaper.

http://www.saroftreve.com/workshop/cat-mtr.shtml



MalcolmNathaniel -> RE: Fucking Machines (8/21/2011 11:59:37 PM)

First of all: way expensive for those parts.

Secondly, if you are not an engineer you want to go slowly and learn. You might find the videos of those machines exciting, but cleaning up the viscera of the slaves/subs/bottoms probably isn't. All it takes is one bad capacitor to turn that thing nuts. So test, test, test, test before you use it on a human being.



Steelchick002 -> RE: Fucking Machines (8/22/2011 12:28:08 AM)

A subject after my own heart... lol
My first Master was big into designing and building fucking machines, it all depends on what you want.
There are a number of choices, reciprocating (moves in and out) vibratory (stays stationary but vibrates, like a sybian) or a mixture of both (my choice).
Most of the bigger heavy duty machines are custom made, hence they are fairly expensive.
I burned out 2 stock electric motors on my sybian and had it replaced with a washing machine motor, it can run for hours now with no problem.
I suggest you find a builder and talk with them about what you want.





HannahLynHeather -> RE: Fucking Machines (8/22/2011 1:00:33 AM)

quote:

I burned out 2 stock electric motors on my sybian and had it replaced with a washing machine motor, it can run for hours now with no problem.
now the nickname makes fucking sense.



MstrssScarlet -> RE: Fucking Machines (8/22/2011 2:12:35 AM)

My husband has been wanting to buy one of these for me for quite some time now. We finally have the finances for it and I'd be interested in seeing the answers to the original question myself. I'm not interested in building one.
Scarlet



Dom469 -> RE: Fucking Machines (8/22/2011 6:57:25 AM)

I'm in Australia and have several different machines.

I find it hard to believe you burnt out two Sybian motors, they have a 5 year warranty.

If your based in Australia and interested let me know.



chiaThePet -> RE: Fucking Machines (8/22/2011 7:39:19 AM)


You could start here.

http://www.dailymail.co.uk/news/article-1358654/The-worlds-biggest-family-Ziona-Chan-39-wives-94-children-33-grandchildren.html

chia* (the pet)



cookiecrumble -> RE: Fucking Machines (8/22/2011 10:35:11 AM)

Im not interested in building one, i cant afford a custom made one so a ready made one for under £800 is what im wanting, any ideas?



MasterSlaveLA -> RE: Fucking Machines (8/22/2011 4:06:07 PM)

quote:

ORIGINAL: Steelchick002

I burned out 2 stock electric motors on my sybian and had it replaced with a washing machine motor, it can run for hours now with no problem.



I'll bet your electric bill is through the ceiling, huh?!! [;)][sm=rofl.gif] lol




xssve -> RE: Fucking Machines (8/23/2011 5:54:43 AM)

The top of the line that I know of, are those based on motion control servos like the kind used on plasma cutters, the HugHer for example, but they're pricy - I dunno how much 800 Pounds or Euros is in dollars, but they usually run a little under a grand US for the servo apparatus and peripherals alone if you aren't buying bulk.

Most of the cost of these is thus in the motion control servo equipment itself, and as for building one yourself, you basically just need to stick a dildo on the end and mount it on something - the rest is programming the software - the lower priced HugHer, the Jive, lists for 1,650 to 1,850, as I say, you might find the servo alone a little cheaper, if you want to mess with programming it yourself.



xssve -> RE: Fucking Machines (8/23/2011 5:58:13 AM)

I'm actually building a hand cranked one myself. [:D]




SirLucifer -> RE: Fucking Machines (8/23/2011 6:10:26 AM)

Looks like that one comes out to $2250 basic + $150 software, or $2660 with all the accessories.



xssve -> RE: Fucking Machines (8/23/2011 6:38:18 AM)

No, they're not cheap.




xssve -> RE: Fucking Machines (8/23/2011 6:40:28 AM)

Stockroom has some less expensive models, I haven't read any reviews.



oddlots347 -> RE: Fucking Machines (8/23/2011 9:20:24 AM)

Hello,

I can get one imported to you for around $300



Lucylastic -> RE: Fucking Machines (8/23/2011 9:43:12 AM)

http://www.extremerestraints.com/fucking-machines_48/
have a look there too



Buzzzz -> RE: Fucking Machines (8/24/2011 5:20:30 AM)

http://www.extremerestraints.com/sex-furniture_167/stockade-with-optional-fucking-rod_165.html
I would go for that one. add a sawzaw at the end, and you are golden :)



ControlImYours -> RE: Fucking Machines (9/1/2011 4:31:51 PM)

I thought you just meant any machine and you had tourrets :/



wolf223 -> RE: Fucking Machines (9/2/2011 8:16:51 AM)

  I built one from an old stand mixer, a few bits of alunimnum
and plastic pipe. Total cost about 10 bucks I have been using
it for about 5 yrs. Works great and it's really loud and scary.



Page: [1]

Valid CSS!




Collarchat.com © 2025
Terms of Service Privacy Policy Spam Policy
0.03125