Stock size

Stock size (Full Version)

All Forums >> [Community Discussions] >> Ask a Mistress

Message

SimplyMichael -> Stock size (3/31/2007 11:34:41 PM)
Since I am making these for women to use on men and I don't have a male submissive to measure, could I get some sizes for common stocks? Hole sizes for arms and necks as well as peoples favorite shapes and designs. I have the most coolest lock ever. It is made up for creating jigs but it will make a great lock for stocks. It is special magnetic lock that with the twist of a button lets go and I have to put my full weight into it to pull it off without unlocking it, something a person IN the stocks can't do. So that instead of it taking a long time to get someone out of humblers and stocks, with the twist of a button you can get them out but no matter what they do they aren't going anywere...

onestandingstill -> RE: Stock size (4/1/2007 4:48:54 AM)
Hi Michael, Well I'm not sure if this helps or not but I figured it would be some food for thought. I have very little wrists and ankles. Most pre-made restraints including most handcuffs are too big for me and I can slip out. My wrists are 6 inches exactly around my wrist bones & my ankle is 7-1/4 inches around just over my ankle bone. I'm pretty sure most women, even tiny women won't have wrists much smaller than mine from my experiences with others and the wrist restraints commonly used being bigger than mine most of the time. Like I said, I'm not sure it will help, but it's all I have. Good luck with your stocks. It sounds ingenious. suzanne Edited to add my neck is 13-1/4 inches.

stockingluvr54 -> RE: Stock size (4/1/2007 7:51:20 AM)
Hope this helps..... I'm 5'8" ,160-65lbs, male, neck is 15 1/4", small wrists

absoluteTPEslave -> RE: Stock size (4/1/2007 9:00:59 AM)
may we please see pictures of the stocks?

DiannaVesta -> RE: Stock size (4/1/2007 10:11:24 AM)
Here's a design I'd love... A type of bench chair thingy where they kneel into it with ass in the air. Thier head gets locked down but with their mouth available. It needs to be bondage they can stay in for a long time. I don't know if anyone here has been to Vault in NYC back when it was in Club Hell Fire in the basement. They had one of those sex chairs where you could put people in various postions. I had a guy bent over taking it in the ass and in his mouth at the same time. It wasn't the best postion. I always thought about this design in my head for turning him into the perfect party favor.

SimplyMichael -> RE: Stock size (4/1/2007 12:00:08 PM)
What I would love to get is the diameter of the head and arm holes as well as the spacing between them from someone who uses a stock. I have some beautiful wood that I am dying to use but until I get measurments...

submarriner -> RE: Stock size (4/2/2007 2:04:58 PM)
Most men's neck sizes are between 15- 18 inches in diameter (think shirt collars), and women would be around 13-18 depending on the size of the women. One of your problems is going to be a universal application to variable sized persons. A small person of 13 inch sized neck probably would still be restrained with an 20 inch neck size because of the head is considerably larger than the neck. But wrist sizes are more succeptible to variation in size since the difference in wrist diameters is small in comparasion to arm diameters. One option to tame both problems would be to make a standard size opening for wrist and neck that accomodates the larger of people, then design an attachment to accomodate cuffs (neck collars or wrist cuffs) placed around the smaller persons body as an adjustment. For large people no cuffs need be used, and for the smallest of people the wood with the adapter would still be binding. Another option would be to design a sliding restraint system into the stocks that would close down upon the anatomical appendage making the stocks adjustable. For an example, a semicircular device (one quarter inch plywood veneered to match the wood selected would work well) attached to the top opening of the stock could be positioned in a mutiple of locations based on the wrist diameter. Attached by way of machined threads with flathead machined screws placed in a variety of predrilled holes to allow for various closures. When fastioned to the top of the stock would narrow the opening depending on the adjustment selected. The same apparatus could be used for the neck. I would also make the stock height adjustable to accomodate tall and short submissives. Good luck and happy designing.

yugla -> RE: Stock size (4/2/2007 2:18:40 PM)
For the wrists, smaller diameter in closer to the neck, larger on the outside - you can have more than one set of wrist openings and safely assume, smaller wrists, shorter shoulder spread. For the neck opening if you make it bigger than it should and then want to impart a bit of choking make a ½” ¾” 1” sleeve to go in it of heavy leather, or foam, or steel etc.

Page: [1]

Collarchat.com © 2025

Terms of Service

0.03125