Collarspace Discussion Forums


Home  Login  Search 

Bondage base for sybian?


View related threads: (in this forum | in all forums)

Logged in as: Guest
 
All Forums >> [Community Discussions] >> Bondage Gear and Apparel >> Bondage base for sybian? Page: [1]
Login
Message << Older Topic   Newer Topic >>
Bondage base for sybian? - 12/4/2007 9:12:16 PM   
machineman


Posts: 16
Joined: 11/2/2007
From: Virginia
Status: offline 		Does anyone make a riser or saw horse designed for use with a sybian? I have been looking, but have not found any good pics for ideas. I gearing up to making one that would allow easy locations to tie the rider down, and that would raise at least raise the knees above the floor if the ankles are secured folded.
Profile   Post #: 1
RE: Bondage base for sybian? - 12/5/2007 10:44:56 AM   
John665623


Posts: 161
Joined: 2/25/2005
Status: offline 		We have a Sybian and have set it on top of the bondage bench a few times.  This gives us more bondage options and also allows the legs to be extended or folded up as we choose. 

(in reply to machineman)
Profile   Post #: 2
RE: Bondage base for sybian? - 12/5/2007 5:27:29 PM   
Drifa


Posts: 547
Joined: 7/27/2007
From: Rural Texas
Status: offline 		We sit ours on a low ottoman, but mine came with a small kind of cube-shaped seat or bench it could be placed atop also.  The ottoman allows opportunites for tie points, but could be tipped over, one supposes.

(in reply to John665623)
Profile   Post #: 3
RE: Bondage base for sybian? - 12/5/2007 6:06:05 PM   
machineman


Posts: 16
Joined: 11/2/2007
From: Virginia
Status: offline 		I am looking for something in a semi-permanent base that would take advantage of some of the existing screw holes. Since I hate to make this machine less portable. I am envisioning a square riser that would only be a few inches in height, and then make it adaptable for usage with a saw horse.

(in reply to Drifa)
Profile   Post #: 4
RE: Bondage base for sybian? - 12/7/2007 7:29:36 AM   
QuietDom


Posts: 255
Joined: 7/10/2004
Status: offline 		Be careful when trying to adapt sawhorses into bondage furniture.  I had the 'clever' idea once of making a super-portable horse/bench by adapting a folding sawhorse.  I found that sawhorses were intended only to support dead weight, not actively wiggling weight.  The footprint just wasn't wide enough, and there was a serious risk of tipping over.

(in reply to machineman)
Profile   Post #: 5
RE: Bondage base for sybian? - 12/7/2007 9:11:25 AM   
ghitaPVH


Posts: 1363
Joined: 11/14/2007
Status: offline 		I tend to fall  of the sybian just when its sitting on the floor by itself, Id be scared to add any height to it! lol

_____________________________

Don't expect anything of me and I promise I'll never disappoint you.

"The true man wants two things: danger and play. For that reason he wants woman, as the most dangerous plaything. --Nietzsche"

(in reply to QuietDom)
Profile   Post #: 6
RE: Bondage base for sybian? - 12/7/2007 8:41:43 PM   
machineman


Posts: 16
Joined: 11/2/2007
From: Virginia
Status: offline 		QuietDom you have a good point there. I have plenty of them fold up or fall over with just cutting wood. I will be making sure there is a nice wide and sturdy base. I certainly don't want any injuries from something like that. That would be no fun at all. ghitaPVH trust me no one will be falling off of this this baby when I am done. That is at least if properly secured for the ride. I got to work on this today, and hope have it finished mostly tomorrow.

(in reply to ghitaPVH)
Profile   Post #: 7
RE: Bondage base for sybian? - 12/9/2007 7:39:01 PM   
VadFarkas


Posts: 923
Joined: 6/7/2007
Status: offline 		Post Photos!!!

_____________________________

Vad Farkas ~ Ringsmith
See my collars & cuffs at
www.ringofsteel.net

(in reply to machineman)
Profile   Post #: 8
RE: Bondage base for sybian? - 12/10/2007 1:07:37 PM   
Termyn8or


Posts: 18681
Joined: 11/12/2005
Status: offline 		ghita ; See they are trying to help you. Think of it as seat belts.

I was going to bring something up here, something diabolical, but I will start another thread. I supose the idea could be used for a sybian, but, well. I'll get on it.

T

(in reply to VadFarkas)
Profile   Post #: 9
RE: Bondage base for sybian? - 12/10/2007 4:19:17 PM   
machineman


Posts: 16
Joined: 11/2/2007
From: Virginia
Status: offline 		"seat belts"  lol I knew I was probably being a bit optimistic when I posted when I would expect to have this finished by. I do now have all the steel cut and waiting to be welded though. It is always annoying though when your job gets in the way of your hobby work:( This is also turning out to be very complex to allow for adaptability for size and position. I have to say I am debating if I should post clear pics as I have many hours into this, and I might decide to make a version to sell if things work as planned. I need a female model to try this thing out.....any volunteers?

< Message edited by machineman -- 12/10/2007 4:23:52 PM >

(in reply to Termyn8or)
Profile   Post #: 10
RE: Bondage base for sybian? - 12/13/2007 6:22:30 PM   
machineman


Posts: 16
Joined: 11/2/2007
From: Virginia
Status: offline 		Well forget that idea of making more these. This becoming a PITA. A 12"x12" area under the sybian is not a lot of room to work in. That plus me trying build in some major flexibility is causing troubles now that I have it all laid out. I will probably have to cut out some things. I do have a question on how to lock down telescoping parts. I have many areas that have square tubing one inside of the next. What is the best way to lock the position down? A series holes to screw threaded know down to lock, a threaded knob that just pushes on the outside of the inside piece, or perhaps a push pin like seen on weight room stuff.

(in reply to machineman)
Profile   Post #: 11
RE: Bondage base for sybian? - 12/15/2007 7:57:38 AM   
machineman


Posts: 16
Joined: 11/2/2007
From: Virginia
Status: offline 		Well this ended up taking MUCH more time then expected, but this is where I am at this point. Everything is in the white waiting to be welded, but I still have to figure out a few clearance problems before I weld. This is double decker design, so that the base that attached to the sybian can be removed  from the riser. This way it only raises it about 1-1/2", but it will still retain some attachment points. It will also allow it to be mounted to other devices where the height would be of no use. As you can see there are lots of places to attach extensions allowing any number of combinations of wrist, neck, waist, ankle, etc. restraints. It will also allow the bench that comes with the sybian to be hard fastened to the sybian. It will eventually allow that bench to be adjusted independent of the sybian for height and distance from the sybian, and will include locations for wrist and neck restraints. When this is all done I want to add padding on the sides to match the sybian. This first pic shows the base that actually attaches to the sybian.http://i245.photobucket.com/albums/gg80/machineman77/sybian%20base/1wm.jpgThis pic shows the raiser for the sybian.http://i245.photobucket.com/albums/gg80/machineman77/sybian%20base/2wm.jpgThis pic shows thee base and raiser for bench.http://i245.photobucket.com/albums/gg80/machineman77/sybian%20base/3wm.jpgThis final pic is an overview of all the basic parts.http://i245.photobucket.com/albums/gg80/machineman77/sybian%20base/4wm.jpg

(in reply to machineman)
Profile   Post #: 12
RE: Bondage base for sybian? - 12/15/2007 3:29:31 PM   
QuietDom


Posts: 255
Joined: 7/10/2004
Status: offline 		I *think* I see what you're doing, but I'm not entirely certain.  Could you post a photo showing the unit fully set-up, with the sybian in place?

Also, we're all curious to hear about the trial runs.  In lots of detail. 

(in reply to machineman)
Profile   Post #: 13
RE: Bondage base for sybian? - 12/15/2007 5:30:42 PM   
windchymes


Posts: 9410
Joined: 4/18/2005
Status: offline 		Once you get the base unit all set up and secure, it might be fun to rig up some kind of a sling-harness to raise and lower the victi....uh, sub down onto the Sybian.

_____________________________

You know it's going to be a GOOD blow job when she puts a Breathe Right strip on first.

Pick-up artists and garbage men should trade names.

(in reply to QuietDom)
Profile   Post #: 14
RE: Bondage base for sybian? - 12/15/2007 9:06:44 PM   
MelsNaughtyVixen


Posts: 21
Joined: 12/2/2007
Status: offline 		Omg being tied to the sybian would be so hot! (If I'm thinking about the right thing, I've seen them before online I think.)

(in reply to windchymes)
Profile   Post #: 15
RE: Bondage base for sybian? - 12/16/2007 6:49:58 AM   
QuietDom


Posts: 255
Joined: 7/10/2004
Status: offline
quote:

ORIGINAL: MelsNaughtyVixen

Omg being tied to the sybian would be so hot! (If I'm thinking about the right thing, I've seen them before online I think.)


Perfect, then!  Machineman, new request; post a picture of the unit fully assembled, with the Sybian in place on it, and MNV tied into position, just to make it entirely clear how your contraption works.

[For bonus points, try to catch her orgasm face.  ]

(in reply to MelsNaughtyVixen)
Profile   Post #: 16
RE: Bondage base for sybian? - 12/16/2007 12:54:30 PM   
ghitaPVH


Posts: 1363
Joined: 11/14/2007
Status: offline 		Im starting to liek this whole idea of being tied down. would definantly help my falling off issue. Anyway, as to your telescopic problem, I make spanking benches with steel telescopic legs, and i just use a series of holes with a cotter pin.

_____________________________

Don't expect anything of me and I promise I'll never disappoint you.

"The true man wants two things: danger and play. For that reason he wants woman, as the most dangerous plaything. --Nietzsche"

(in reply to QuietDom)
Profile   Post #: 17
RE: Bondage base for sybian? - 12/18/2007 7:43:42 PM   
MelsNaughtyVixen


Posts: 21
Joined: 12/2/2007
Status: offline 		Lol thanks QuietDom, but I do have to say I wouldn't mind taking up that offer 0:-) I don't think it would be too hard to catch my orgasm face either because on something as powerful as a sybian, especially if I was like tied onto it, I would probably be going pretty damn crazy. My orgasm face might turn into crying though lol.

(in reply to QuietDom)
Profile   Post #: 18
RE: Bondage base for sybian? - 12/19/2007 5:34:24 PM   
machineman


Posts: 16
Joined: 11/2/2007
From: Virginia
Status: offline
Finished!
http://i245.photobucket.com/albums/gg80/machineman77/sybian%20base/IMG_0389.jpg

Ok just kidding. I still have a bit more work to do to get it done, but it is moving along. How do you like my imitation of my Avatar? The base is on the table in front of me mostly together. The left assembly being for the sybian itself, and the right assembly being for the bench. Ran into the usual delays though running out of welding gas, welding the wrong parts together( not good at all ), attending my first event , and of course work. As I hope you can tell the base will still need a number of attachments and extensions made that will fit into the base. Without those the base is just a complicated riser. Those will be easy though as they are much less complicated.

windchymes I like the way your kinky mind works. I think I already have an idea how to make your suggestion work. I intended to make this modular anyways, and I knew I was going to be buying a winch soon anyways. You get the first ride of that particular setup if you want it.

QuietDom I want nothing more then get the pics you requested. Unfortunately with me currently being single, and new to being openly in the scene I don't have anyone to play with 

MelsNaughtyVixen I always am told I should spend some time volunteering to help others, so maybe you should too. If you feel you need to be charitable with your time in this time of giving I would be happy to help. One warning though is that with all the flexibility I am building into this thing it might be a long session. You are not far away after all and I am up in DC often...

(in reply to MelsNaughtyVixen)
Profile   Post #: 19
RE: Bondage base for sybian? - 12/19/2007 8:08:51 PM   
MelsNaughtyVixen


Posts: 21
Joined: 12/2/2007
Status: offline 		Lol maybe I could be charitable ;-) It sounds like a really hot idea but I think I would probably be like a complete mess and going crazy after not too long, but with no power to stop it I guess I would just have to suffer. I guess that's the point!

(in reply to machineman)
Profile   Post #: 20
Page:   [1]
All Forums >> [Community Discussions] >> Bondage Gear and Apparel >> Bondage base for sybian? Page: [1]
Jump to:





New Messages No New Messages
Hot Topic w/ New Messages Hot Topic w/o New Messages
Locked w/ New Messages Locked w/o New Messages
 Post New Thread
 Reply to Message
 Post New Poll
 Submit Vote
 Delete My Own Post
 Delete My Own Thread
 Rate Posts




Collarchat.com © 2025
Terms of Service Privacy Policy Spam Policy

0.094