Collarspace Discussion Forums


Home  Login  Search 

Steel Paddles


View related threads: (in this forum | in all forums)

Logged in as: Guest
 
All Forums >> [Community Discussions] >> General BDSM Discussion >> Steel Paddles Page: [1]
Login
Message << Older Topic   Newer Topic >>
Steel Paddles - 6/3/2008 10:03:38 AM   
wulfgarw


Posts: 752
Joined: 3/18/2008
Status: offline 		Does anyone have a resource for a steel paddle?  My google-fu is off today, nor did a search of this site help.  I would normally create something like this myself, but I don't have much in the way of metalworking tools, particularly a way to polish it to a smooth, high gleam.  Ideally, this would be about 5/16" to 3/8" inch thick, about 18" long and 3-4 inches wide.  Thanks to any who can help.
Profile   Post #: 1
RE: Steel Paddles - 6/3/2008 10:11:16 AM   
Lynnxz


Posts: 4813
Joined: 10/3/2006
From: Atlanta
Status: offline 		That's vicious! ^_^

If you can't find anyone here, it shouldn't be too hard to find a welder who will make one for you for a few bucks. We went to a metal supply place to pick up the steel for my corset, even told them what it was for and they didn't even bat an eye. 


_____________________________

HBIC



(in reply to wulfgarw)
Profile   Post #: 2
RE: Steel Paddles - 6/3/2008 10:15:04 AM   
Sundowner


Posts: 2549
Joined: 3/11/2007
Status: offline 		 



"and they didn't even bat an eye" - maybe a lickle bat after you'd left do you think? 

(in reply to Lynnxz)
Profile   Post #: 3
RE: Steel Paddles - 6/3/2008 10:21:22 AM   
Lynnxz


Posts: 4813
Joined: 10/3/2006
From: Atlanta
Status: offline 		Mayyyybe ^_^

I've discovered that the "blue collar" guys are less judgemental in general though, and much more likely to agree to help out with stuff.

Seriously, just go find a metal supply place to get the metal first though... way cheaper that way.


_____________________________

HBIC



(in reply to Sundowner)
Profile   Post #: 4
RE: Steel Paddles - 6/3/2008 10:55:22 AM   
CruelDesires


Posts: 824
Joined: 11/20/2004
Status: offline 		Try aircraft aluminum or titanium. One of the most vicious paddles I've seen was made from some synthetic resin sandwiched between two sheets of aluminum.

CD

_____________________________

Reputation is what other people know about you. Honor is what you know about yourself.
Lois McMaster Bujold, "A Civil Campaign", 1999

(in reply to Lynnxz)
Profile   Post #: 5
RE: Steel Paddles - 6/3/2008 11:12:53 AM   
christine1


Posts: 6155
Joined: 12/15/2007
From: i'm headed to HIM...
Status: offline 		the closest thing i've found is a gigantic barbque spatula i got from a restaurant supply place.  the metal spatula part of it is probably 10 inches long and 4 inches wide... there were types with and without holes, it isn't what you described, but it's an idea that's already premade.

_____________________________

i am woman! er, godzilla! hear me roar!

http://wavcentral.com/cgi-bin/log/log.cgi?id=2856&sound=/sounds/movies/godzilla/roar.mp3


He's the "boom" overwhelming...

He is my Master, my lover, my best friend my everything.

(in reply to CruelDesires)
Profile   Post #: 6
RE: Steel Paddles - 6/3/2008 11:51:30 AM   
SilentTigresss


Posts: 261
Joined: 1/18/2004
Status: offline 		Hmmm, mmmm, wow. Now that is one paddle I do not have, and will be watching this thread to read the replies!

(in reply to wulfgarw)
Profile   Post #: 7
RE: Steel Paddles - 6/3/2008 12:10:47 PM   
metalmiss


Posts: 341
Joined: 5/4/2005
From: Croydon, UK
Status: offline 		Though i don't know exactly where one might be found, i can recommend

http://www.spankingtools.com

They are a very reputable company in the UK (not sure what the postage would be like to where you are) But they do make things like this to order and the quality of their products is excellent and second to none.

Where metal paddles are concerned, your post inspired a smile here.. my Master had such a paddle gifted to Him once upon a time (Unfortunately He has no idea who the maker was) But it is very pretty..

http://i53.photobucket.com/albums/g48/themetalmiss/Paddle.jpg

Its made from aluminium, 3 1/2" wide on the spanking end, 17" long and 1/4" thick..

And did i mention it makes my bum go ouchie? lol..


_____________________________

"The longing to serve, to submit, to abandon oneself sexually, emotionally, and physically makes one a slave either to a Man, a Woman or to God. Submission to that passion is divine degradation." - Dorothy C. Hayden

Owned by RavenMuse

(in reply to wulfgarw)
Profile   Post #: 8
RE: Steel Paddles - 6/3/2008 12:19:00 PM   
DominantJenny


Posts: 645
Joined: 4/6/2008
Status: offline 		No, but now I want one...Humph.

(in reply to metalmiss)
Profile   Post #: 9
RE: Steel Paddles - 6/3/2008 12:28:03 PM   
SteelofUtah


Posts: 5307
Joined: 10/2/2007
From: St George Utah
Status: offline 		Just found THESE however it would seem the site is now defunct and the product is no longer avaliable but it shows a simple concept maybe you could make one of your own or have someone make one for you.

Then I found THIS but it looks like you have to get detailed to make an order

The web sites I found on these things can be found

http://captivepleasures.com/

and

http://www.tirepaddle.com/

Enjoy

Steel (yeah like the paddle)

_____________________________

Just Steel
Resident Therapeutic Metallurgist
The Steel Warm-Up © ™
For the Uber Posters
Thanks for the Grammatical support : ) ~ Term

(in reply to SilentTigresss)
Profile   Post #: 10
RE: Steel Paddles - 6/3/2008 1:20:16 PM   
Phin


Posts: 1802
Joined: 2/26/2007
Status: offline 		Do you have a way to cut the steel?

if no... stop reading
if yes buy this

http://www.metalsdepot.com/Cart3/viewCart1.phtml?LimAcc=&aident=

Do you have an angle grinder?

if no but do have a drill by this

http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=1341

if yes this

http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=96121

either will do a nice job polishing the metal, the drill set will take alot longer go untill you start getting some sheen to the metal the rub some 3 in 1 oil into the surfaces and go over it again with the brush.

_____________________________

"Isn't wonderful when our bruises show what we hide in the back of our heads?"Fayetteville band, Nephilym

"He is my angel, my devil, my naughty boy, but above anything else my Master"My girl sin

(in reply to SteelofUtah)
Profile   Post #: 11
RE: Steel Paddles - 6/3/2008 3:19:45 PM   
Stusmobile


Posts: 145
Joined: 5/26/2008
From: No fixed abode
Status: offline 		This thread is evil in such a beautiful way ...

You've started my brain churning over with thoughts of paddles and just how many different effects could be achived with the same basic design with a few twists. I need to play around a little and see exactly what I can come up with but right off the top of my head I am thinking solid, holed, curved and hammered just to begin with.

Thank you to the OP for sparking the creative flow .......


_____________________________

Goethe: "Whatever you do, or dream you can do, begin it - boldness has genius, power and magic in it. Begin it now."

EmlyKate is mine and I wouldn't wish for anything else.

(in reply to wulfgarw)
Profile   Post #: 12
RE: Steel Paddles - 6/3/2008 3:39:29 PM   
wulfgarw


Posts: 752
Joined: 3/18/2008
Status: offline 		What I was actually hoping to find, or have made, is a metal paddle made from a single piece of flat stock.  http://www.flickr.com/photos/23559241@N07/2548813865/   is a pic of a poplar paddle that I made, and would like a steel one similar to it or if the price is right, a matched pair, one with holes and one without.

(in reply to Stusmobile)
Profile   Post #: 13
RE: Steel Paddles - 6/3/2008 4:10:10 PM   
azropedntied


Posts: 1829
Joined: 7/25/2005
From: Phx AZ
Status: offline 		Find a machine shop with a plasma cutter , buy the steel , Or T-206 alumim . make pattern , take item down to shop have them cut it out , have them rough grind it too . Then you can  put the holes if you want with a drill and finish sand and polish item . Just know all the holes need to be deburred , the more  complex the curves the longer it shall take to get smooth .
If you can not  find a plasma cutter a steel blade to a scroll or jig saw will also work though you need to  go slow and use cutting oil.

(in reply to wulfgarw)
Profile   Post #: 14
RE: Steel Paddles - 6/3/2008 4:14:12 PM   
kiwisub12


Posts: 4742
Joined: 1/11/2006
Status: offline 		Oh boy!!!!! A thread to let all the boys talk about toys!!!                     More power!
()

(in reply to azropedntied)
Profile   Post #: 15
RE: Steel Paddles - 6/3/2008 4:14:45 PM   
azropedntied


Posts: 1829
Joined: 7/25/2005
From: Phx AZ
Status: offline 		I found one smaller in scale but  shaped like a tennis racket , with the words "serve it up " on the item , it had 3 feet on it , which i removed .After sanding smooth one side i left the other  waffle like side alone .Its a perfect size and cost me some time , sand paper ,a lil wear  on my ginder , and 1.00$ at yee Ole Thrift store ,in the kitchen stuff .

quote:

ORIGINAL: christine1

the closest thing i've found is a gigantic barbque spatula i got from a restaurant supply place.  the metal spatula part of it is probably 10 inches long and 4 inches wide... there were types with and without holes, it isn't what you described, but it's an idea that's already premade.

(in reply to christine1)
Profile   Post #: 16
RE: Steel Paddles - 6/3/2008 4:29:31 PM   
CruelDesires


Posts: 824
Joined: 11/20/2004
Status: offline 		You can also find a shop that cuts items out with a water jet machine. Waterjets cut up to 1/4 tool steel easily and can cut out really cool designs and logos.

CD

_____________________________

Reputation is what other people know about you. Honor is what you know about yourself.
Lois McMaster Bujold, "A Civil Campaign", 1999

(in reply to azropedntied)
Profile   Post #: 17
RE: Steel Paddles - 6/3/2008 6:51:40 PM   
Evility


Posts: 915
Joined: 12/19/2007
Status: offline 		Something anodized... chrome even... would be totally fucking awesome.

(in reply to wulfgarw)
Profile   Post #: 18
Page:   [1]
All Forums >> [Community Discussions] >> General BDSM Discussion >> Steel Paddles Page: [1]
Jump to:





New Messages No New Messages
Hot Topic w/ New Messages Hot Topic w/o New Messages
Locked w/ New Messages Locked w/o New Messages
 Post New Thread
 Reply to Message
 Post New Poll
 Submit Vote
 Delete My Own Post
 Delete My Own Thread
 Rate Posts




Collarchat.com © 2025
Terms of Service Privacy Policy Spam Policy

0.078