Irishm57
Posts: 222
Joined: 11/27/2005 Status: offline
|
I have been using tens units a long time. I have a rimba (not the same model you have) and 2 erostek ones. I did look and notice that on the "deluxe digital power box" , the one that goes for around 100 to 110, it only has the pre programmed modes and intensity by the looks of it. and no way to adjust the rate and amplitude like the "begginer box". So i would sugest try a low intensity then go through the the programmed modes one at a time. and vary the intensity a little on each one until you find a comfortable setting. Now as to cock attachments, i have yet to see one that is worth much. they have small contacts an very few contacts, so a burning sensation is more likely than a "shock" , same as the pads give. The larger the contact area and the more constant the contact is what you want for pleasure or even disapline pain. Small contact area and lack of pressure on the contact area will usually result in a burning sensation, sometimes like someone stuck a cigarette on your penis. On the lube question, you can try to use a water base one, but test it on the bands to make sure it wont damage or stain them. Any lube or jell , even vassilene will reduce the burning feeling, when contact area is small or lacking pressure. How ever electrosex lubes will conduct far better. If you are semi handy and have a hack saw and a medium duty soldering iron you can make your own genital attachments. 10 or so inches of 1/4 inch copper tubing, 1 inch of 1 inch copper pipe or 1 1/4 copper pipe , solder a wire to each and a 1/8 inch phone connector( or depending on what your unit takes , my erostek takes 1/8 inch) and make something that looks like this, this works great for both pleasure and pain for bdsm. http://www.slavechris.com/crings/crings.html I have even made some wierd copper cage type designs for genital play , they can been seen from my main page.
_____________________________
Some of the toys I have made can be seen at http://www.slavechris.net
|