subcuriouscal
Posts: 6
Joined: 1/25/2008 Status: offline
|
quote:
ORIGINAL: Valrith I'd love to hear more about the space you designed. I enjoy dreaming up ideas for extensive cages myself. I'll try and get some pictures up. My best work yet involved 8ft by 8ft steel mesh panels, the type used to build heavy duty construction fencing. These were being thrown away by a construction company, so we took them and put themt o good use. We welded the pieces together two panels long and one wide creating an very effective cell 16ft by 8 ft. My friends slave, when not at work or in service, spends her time there safe and sound. We developed this into his houses basement. after positioning it where he wanted it, we installed anchor bolts into the concrete at one foot intervals, and created concrete forms encompassing the floor bolts and the bottom 6 inches of the panels as well as 3 inches either side of the panel, mixed concrete, and poured it into the forms creating a very permanent, and inescapable cell. We cut a section of the panel 6 ft tall and 4 feet wide and welded a frame and railing for it to slide back and forth on creating a secure door. The door is locked a heavy locking latch and padlock. As a safety measure, we made a duplicate of the key and build a small balsa wood box and hung it in the top corner of the cell. The only way to get the key is to smash the box, but in case of fire or other emergency, there is a way to escape quickly, but not without evidence of the escape. After it was created, he added quite a few luxuries to the cell to allow for comfortable long term confinement. He's asked me to help install a sink and toilet to the cell, thats a project for later this year...
|