quote:

ORIGINAL: WhoreMods

quote:

ORIGINAL: BoscoX

quote:

ORIGINAL: WickedsDesire

quote:

ORIGINAL: Nnanji

quote:

ORIGINAL: BoscoX

quote:

ORIGINAL: Nnanji

quote:

ORIGINAL: itsSIRtou

quote:

ORIGINAL: Nnanji

quote:

ORIGINAL: Nnanji

quote:

ORIGINAL: itsSIRtou

quote:

ORIGINAL: Nnanji

quote:

ORIGINAL: itsSIRtou

quote:

ORIGINAL: Nnanji

quote:

ORIGINAL: itsSIRtou

quote:

ORIGINAL: Nnanji

quote:

ORIGINAL: itsSIRtou

quote:

ORIGINAL: InfoMan

quote:

ORIGINAL: itsSIRtou

quote:

ORIGINAL: InfoMan

quote:

ORIGINAL: Musicmystery

Unlike the superior US bridges collapsing from neglect.

Making America Great Again, pre-transportation era.

What bridges have collapsed due to neglect in the US?

here one that did here in Minneapolis,MN http://www.mprnews.org/story/2007/08/02/inspection (written the day after.)

the I-35W bridge into downtown Mpls. collapsed on Aug. 1st, 2007.

more reading.... http://saveourbridges.com/pdfs/TheCollapseofI-35.pdf

https://www.ntsb.gov/investigations/AccidentReports/Reports/HAR0803.pdf

sorry ur full of shit. I wouldn't of had to remind u a damn thing what CAD is capable of if u had a 1/4 the experience ur spewing. even if u managed to have a "staff" u'd know they would have to have a level of technical understanding to relay what u (or ur minions) sent them to the screen for rendering.

on the other hand I guess that makes them smarter than u. If u needed a stress test they would more than u know how to get that accomplished. ur clueless. Thanks for admitting it in ur roundabout way....

u aint that smart... u cant even spell it correctly... now we all know.

Pedal ur shit to someone else, nobody intelligent is buying it. (now watch boss-hoe defend him....LOL)

That's the point Spanky. That's why I'm laughing at you. There are two major problems with CAD drafting. The first is that there is a perception that a mistake is so easy to fix that a lot of mistakes get made. How many times have I seen a cad drafter zoom down to a little area and fix one aspect of a problem while not seeing how it interacts with other aspects of the larger drawing? More times than I have hair on my head is the answer. And that happens a lot because people who do autocadd generally don't know/understand the significance of what they're doing. The second major problem is that people who do autocadd effectively spend their career doing autocadd and getting good at it and not learning about the engineering.

It's funny, I know a lot of people, peers, that can't spell worth a damn because their brains do numbers not letters. I'd like to point out that we who do excel at number don't make fun of people like you who can't do either numbers or letters. We just assume the intellectually lower class will do what they can and we have to check their work. So, don't let spelling make you too much of a smarty pants Spanky.

well then u need to get around a better brand of CAD professionals. And get up outta the dark ages with ur software..... what ya do? buy the child's home version??

The people who have trained Me and others I know that have been in the Automotive and Construction industries who regularly use CAD simply don't have ur issues.

And once again current 2D/3D CAD software doesn't have the issues u report and there's TONS of training on how to avoid it. (even on youtube!!)

In fact now multiple people in different countries can be working on the same CAD drawing in updated real time with multiple views on multiple screens, and not run into ur stated issues.

Seriously what company do u have that u are clueless about this?? u need to find & hire someone in Design Management to get ur company out of the stone age.....

dude u ARE a dinosaur. What's wrong with u that a guy just getting out of college has a better grasp of ur OWN technology capabilities than u do, and ur supposed to be a leader OF ur company??? REALLY???


Don't post to Me ur laughing at Me seriously,

cuz Im not laughing at u anymore man..... ur just sad, and I feel bad for ur employees.

Really? You were trained to be this "good" on a computer? I'd hate to have to communicate with you before your training. But, let's set that aside and ask this question. If you are essentially down on the lowest rung of the technical ladder, how can you know what supervisors are looking at your work for? You don't. I'd also suggest you ask for your money back from "college". Just what subject is your college degree in?

Advanced Leftist Indoctrination Studies - I guarantee you.

I trimmed this some since it was getting pretty long with all of the fertilizer coming from Spanky. I'm betting his degree, if it wasn't some 18-month trade school, was in some sort of minority studies.

can you repeat i didn't understand this one this first 40 times

Not sure what your point is?

Can I add a quotation or to to this? That shrinking perspective is awesome.

quote:

ORIGINAL: WhoreMods



Yaay!

quote:

ORIGINAL: BoscoX

quote:

ORIGINAL: WhoreMods

quote:

ORIGINAL: BoscoX

quote:

ORIGINAL: WickedsDesire

quote:

ORIGINAL: Nnanji

quote:

ORIGINAL: BoscoX

quote:

ORIGINAL: Nnanji

quote:

ORIGINAL: itsSIRtou

quote:

ORIGINAL: Nnanji

quote:

ORIGINAL: Nnanji

quote:

ORIGINAL: itsSIRtou

quote:

ORIGINAL: Nnanji

quote:

ORIGINAL: itsSIRtou

quote:

ORIGINAL: Nnanji

quote:

ORIGINAL: itsSIRtou

quote:

ORIGINAL: Nnanji

quote:

ORIGINAL: itsSIRtou

quote:

ORIGINAL: InfoMan

quote:

ORIGINAL: itsSIRtou

quote:

ORIGINAL: InfoMan

quote:

ORIGINAL: Musicmystery

Unlike the superior US bridges collapsing from neglect.

Making America Great Again, pre-transportation era.

What bridges have collapsed due to neglect in the US?

here one that did here in Minneapolis,MN http://www.mprnews.org/story/2007/08/02/inspection (written the day after.)

the I-35W bridge into downtown Mpls. collapsed on Aug. 1st, 2007.

more reading.... http://saveourbridges.com/pdfs/TheCollapseofI-35.pdf

https://www.ntsb.gov/investigations/AccidentReports/Reports/HAR0803.pdf

sorry ur full of shit. I wouldn't of had to remind u a damn thing what CAD is capable of if u had a 1/4 the experience ur spewing. even if u managed to have a "staff" u'd know they would have to have a level of technical understanding to relay what u (or ur minions) sent them to the screen for rendering.

on the other hand I guess that makes them smarter than u. If u needed a stress test they would more than u know how to get that accomplished. ur clueless. Thanks for admitting it in ur roundabout way....

u aint that smart... u cant even spell it correctly... now we all know.

Pedal ur shit to someone else, nobody intelligent is buying it. (now watch boss-hoe defend him....LOL)

That's the point Spanky. That's why I'm laughing at you. There are two major problems with CAD drafting. The first is that there is a perception that a mistake is so easy to fix that a lot of mistakes get made. How many times have I seen a cad drafter zoom down to a little area and fix one aspect of a problem while not seeing how it interacts with other aspects of the larger drawing? More times than I have hair on my head is the answer. And that happens a lot because people who do autocadd generally don't know/understand the significance of what they're doing. The second major problem is that people who do autocadd effectively spend their career doing autocadd and getting good at it and not learning about the engineering.

It's funny, I know a lot of people, peers, that can't spell worth a damn because their brains do numbers not letters. I'd like to point out that we who do excel at number don't make fun of people like you who can't do either numbers or letters. We just assume the intellectually lower class will do what they can and we have to check their work. So, don't let spelling make you too much of a smarty pants Spanky.

well then u need to get around a better brand of CAD professionals. And get up outta the dark ages with ur software..... what ya do? buy the child's home version??

The people who have trained Me and others I know that have been in the Automotive and Construction industries who regularly use CAD simply don't have ur issues.

And once again current 2D/3D CAD software doesn't have the issues u report and there's TONS of training on how to avoid it. (even on youtube!!)

In fact now multiple people in different countries can be working on the same CAD drawing in updated real time with multiple views on multiple screens, and not run into ur stated issues.

Seriously what company do u have that u are clueless about this?? u need to find & hire someone in Design Management to get ur company out of the stone age.....

dude u ARE a dinosaur. What's wrong with u that a guy just getting out of college has a better grasp of ur OWN technology capabilities than u do, and ur supposed to be a leader OF ur company??? REALLY???


Don't post to Me ur laughing at Me seriously,

cuz Im not laughing at u anymore man..... ur just sad, and I feel bad for ur employees.

Really? You were trained to be this "good" on a computer? I'd hate to have to communicate with you before your training. But, let's set that aside and ask this question. If you are essentially down on the lowest rung of the technical ladder, how can you know what supervisors are looking at your work for? You don't. I'd also suggest you ask for your money back from "college". Just what subject is your college degree in?

Advanced Leftist Indoctrination Studies - I guarantee you.

I trimmed this some since it was getting pretty long with all of the fertilizer coming from Spanky. I'm betting his degree, if it wasn't some 18-month trade school, was in some sort of minority studies.

can you repeat i didn't understand this one this first 40 times

Not sure what your point is?

Can I add a quotation or to to this? That shrinking perspective is awesome.

By all means!

quote:

ORIGINAL: Musicmystery

Maybe trim that quote a little . . .

quote:

ORIGINAL: Nnanji

quote:

it's sad..... u on the reportedly on the top rung "technically" and you don't know??

I didn't bother to "dazzle" u. Because I'm not here to dazzle anybody especially u. Hell u probably wasted more money than I've ever made if u are to be believed. u want to be dazzled? Go watch an xhamster video. That should be setting a high enough bar for u.

I answered the question about my education a long time ago, - go back and read..... Please keep up.

And it makes it even more shameful that a person with your reported education has a person with my education, from your own statements, point out serious flaws in your thinking, corporate structure, company communications with your employees

and instead you are erroneously think I'm going to buy into your fake show of reported business acumen, when it obviously isn't doing your company any favors,

There you go spanky. You have nothing.

Have a nice day.

quote:

ORIGINAL: itsSIRtou

quote:

ORIGINAL: WhoreMods



Yaay!

WOW, where did you get a picture of nnanji's shrinking credibility??

quote:

ORIGINAL: WhoreMods

quote:

ORIGINAL: itsSIRtou

quote:

ORIGINAL: WhoreMods



Yaay!

WOW, where did you get a picture of nnanji's shrinking credibility??

It's one of Robert Crumb's, believe it or not.

quote:

ORIGINAL: itsSIRtou

quote:

ORIGINAL: WhoreMods

quote:

ORIGINAL: itsSIRtou

quote:

ORIGINAL: WhoreMods



Yaay!

WOW, where did you get a picture of nnanji's shrinking credibility??

It's one of Robert Crumb's, believe it or not.

now that u mention it, it does have Crumb's style all over it..... good find!

quote:

ORIGINAL: itsSIRtou

quote:

ORIGINAL: Nnanji

quote:

it's sad..... u on the reportedly on the top rung "technically" and you don't know??

I didn't bother to "dazzle" u. Because I'm not here to dazzle anybody especially u. Hell u probably wasted more money than I've ever made if u are to be believed. u want to be dazzled? Go watch an xhamster video. That should be setting a high enough bar for u.

I answered the question about my education a long time ago, - go back and read..... Please keep up.

And it makes it even more shameful that a person with your reported education has a person with my education, from your own statements, point out serious flaws in your thinking, corporate structure, company communications with your employees

and instead you are erroneously think I'm going to buy into your fake show of reported business acumen, when it obviously isn't doing your company any favors,

There you go spanky. You have nothing.

Have a nice day.

and u have what exactly? Oh wait,... u still have the question of why u allow ur reported company to stay in the Stone Age?

u know, the questions ur backpedaling away from because ur whole scenario is a fake. and u got caught.

Or ur gonna run away from an answer to that still?

we all will not laugh at u (much) for admitting its all a lie. u can.... be a big boy now....

quote:

ORIGINAL: WickedsDesire

ooo ffs it was the thickness of the gusset plate that most likely caused the problem catastrophic failure...and it was the one at the bottom, Christ, not the top of the bridge.

heh do you never wonder how many bits of bad steel/concrete are out there? loads guffaws and that’s before you take into account the design/load/environment


Video Captured of 35W Bridge Collapse

quote:

ORIGINAL: Musicmystery

Ever notice how a few people are endlessly entering conversations proclaiming how smart they are?

Methinks there's a lot of protesting too much going on.

Trying to convince themselves, mainly.

quote:

ORIGINAL: itsSIRtou

quote:

ORIGINAL: Nnanji

quote:

ORIGINAL: itsSIRtou

quote:

ORIGINAL: Nnanji

quote:

ORIGINAL: itsSIRtou

quote:

ORIGINAL: InfoMan

quote:

ORIGINAL: itsSIRtou

quote:

ORIGINAL: InfoMan

quote:

ORIGINAL: Musicmystery

[/Quote]

If I do understand your pigin you seem to be saying that inspection was the problem, yet your article says it was the initial design. Just so you know, inspectors are non-technical people that check and make sure what the design says should be there is what is there. As I don't expect you to understand the process, I'll refrain from mentioning how stupid the comment was.

that makes u pretty fucking godawful stupid... Again!! non-technically speaking of course,.... just sayn'

Actually, your level of "ignance" regarding what you just posted makes it impossible to actually respond to you. You don't even understand what you don't understand. Let me just point out one. A major or minor in CAD. Do you know what that is? It's Computer Added Drafting. Somebody tells them what to draw and without understanding why, they draw it. Now, you may have to be pretty smart to do that, obviously beyond your intellectual talents, but it doesn't even imply they know how to calculate a shear or moment on a bridge structure. (Ya, I used technical words you can...maybe...Google)

u evidently haven't ever used a CAD program. nor have u ever read one. I DO stupid. I bet u couldn't draw a simple 3D hockey puck.

Nobody just " tells them what to draw and without understanding why, they draw it." that might of been in ur grandpa's days...like WWII....done on paper. Not today spanky.

for years the more spendy versions of AutoCAD has been quite accurate in shear, torque stress, etc. (PS...the word is MOVEMENT.) Hell even race car suspension travel is easy to emulate on AutoCAD if u know the math, angles, and radius u want. If u really wanna update urself, watch how they build a carbon-fiber Indy of Formula 1 car some evening.

Because torsional rigidity in a drag race car IS a must or the driver gets killed u fucking imbecilic turdball.....

just to let u know, race car design & building was My thing, Now I have a degree in Design Management, so u picked the wrong person to say what u didn't know about CAD or inspectors .... LOL!!


NOBODY JUST GUESSES AT HOW THICK RIVETS, PLATES, OR GIRDERS HOLDING A BRIDGE TOGETHER NEEDS TO BE ANYMORE!!!

builders knew how much the tallest buildings in Dubai will sway in their turbulent desert winds LONG before the 1st drop of cement got poured because of CAD motion & Stress simulations.

and now with 3D printing becoming the latest thing, even more accurate designs processes will be implemented.

u dude are a fucking technical dinosaur if u really think "sit & draw" is that's all CAD drafting is.

https://www.youtube.com/watch?v=85AVnRl8Aco Here's a vid showing how to stress test a design in Solidworks


nice try, but ur still fucking stupid.... u can add imbecilic to that.

quote:

Shear and bending moment diagrams are analytical tools used in conjunction with structural analysis to help perform structural design by determining the value of shear force and bending moment at a given point of a structural element such as a beam. These diagrams can be used to easily determine the type, size, and material of a member in a structure so that a given set of loads can be supported without structural failure. Another application of shear and moment diagrams is that the deflectionof a beam can be easily determined using either the moment area method or the conjugate beam method.

quote:

ORIGINAL: Nnanji

quote:

ORIGINAL: itsSIRtou

quote:

ORIGINAL: Nnanji

quote:

ORIGINAL: itsSIRtou

quote:

ORIGINAL: Nnanji

quote:

ORIGINAL: itsSIRtou

quote:

ORIGINAL: InfoMan

quote:

ORIGINAL: itsSIRtou

quote:

ORIGINAL: InfoMan

quote:

ORIGINAL: Musicmystery

[/Quote]

If I do understand your pigin you seem to be saying that inspection was the problem, yet your article says it was the initial design. Just so you know, inspectors are non-technical people that check and make sure what the design says should be there is what is there. As I don't expect you to understand the process, I'll refrain from mentioning how stupid the comment was.

that makes u pretty fucking godawful stupid... Again!! non-technically speaking of course,.... just sayn'

Actually, your level of "ignance" regarding what you just posted makes it impossible to actually respond to you. You don't even understand what you don't understand. Let me just point out one. A major or minor in CAD. Do you know what that is? It's Computer Added Drafting. Somebody tells them what to draw and without understanding why, they draw it. Now, you may have to be pretty smart to do that, obviously beyond your intellectual talents, but it doesn't even imply they know how to calculate a shear or moment on a bridge structure. (Ya, I used technical words you can...maybe...Google)

u evidently haven't ever used a CAD program. nor have u ever read one. I DO stupid. I bet u couldn't draw a simple 3D hockey puck.

Nobody just " tells them what to draw and without understanding why, they draw it." that might of been in ur grandpa's days...like WWII....done on paper. Not today spanky.

for years the more spendy versions of AutoCAD has been quite accurate in shear, torque stress, etc. (PS...the word is MOVEMENT.) Hell even race car suspension travel is easy to emulate on AutoCAD if u know the math, angles, and radius u want. If u really wanna update urself, watch how they build a carbon-fiber Indy of Formula 1 car some evening.

Because torsional rigidity in a drag race car IS a must or the driver gets killed u fucking imbecilic turdball.....

just to let u know, race car design & building was My thing, Now I have a degree in Design Management, so u picked the wrong person to say what u didn't know about CAD or inspectors .... LOL!!


NOBODY JUST GUESSES AT HOW THICK RIVETS, PLATES, OR GIRDERS HOLDING A BRIDGE TOGETHER NEEDS TO BE ANYMORE!!!

builders knew how much the tallest buildings in Dubai will sway in their turbulent desert winds LONG before the 1st drop of cement got poured because of CAD motion & Stress simulations.

and now with 3D printing becoming the latest thing, even more accurate designs processes will be implemented.

u dude are a fucking technical dinosaur if u really think "sit & draw" is that's all CAD drafting is.

https://www.youtube.com/watch?v=85AVnRl8Aco Here's a vid showing how to stress test a design in Solidworks


nice try, but ur still fucking stupid.... u can add imbecilic to that.

should have googled it spanky like I suggested. Any first year engineering student knows what a shear moment diagram is.



https://en.m.wikipedia.org/wiki/Shear_and_moment_diagram

quote:

Shear and bending moment diagrams are analytical tools used in conjunction with structural analysis to help perform structural design by determining the value of shear force and bending moment at a given point of a structural element such as a beam. These diagrams can be used to easily determine the type, size, and material of a member in a structure so that a given set of loads can be supported without structural failure. Another application of shear and moment diagrams is that the deflectionof a beam can be easily determined using either the moment area method or the conjugate beam method.

Now since you didn't know what a shear moment diagram is we know you've had no technical education. Since you tried to school me on something you know nothing about, we know you're an ignint person telling lies and selling horse shit.

quote:

ORIGINAL: itsSIRtou

quote:

ORIGINAL: Nnanji

quote:

ORIGINAL: itsSIRtou

well then u need to get around a better brand of CAD professionals. And get up outta the dark ages with ur software..... what ya do? buy the child's home version??

The people who have trained Me and others I know that have been in the Automotive and Construction industries who regularly use CAD simply don't have ur issues.

And once again current 2D/3D CAD software doesn't have the issues u report and there's TONS of training on how to avoid it. (even on youtube!!)

In fact now multiple people in different countries can be working on the same CAD drawing in updated real time with multiple views on multiple screens, and not run into ur stated issues.

Seriously what company do u have that u are clueless about this?? u need to find & hire someone in Design Management to get ur company out of the stone age.....

dude u ARE a dinosaur. What's wrong with u that a guy just getting out of college has a better grasp of ur OWN technology capabilities than u do, and ur supposed to be a leader OF ur company??? REALLY???


Don't post to Me ur laughing at Me seriously,

cuz Im not laughing at u anymore man..... ur just sad, and I feel bad for ur employees.

quote:

ORIGINAL: Nnanji

Really? There's tons of training on how to avoid the problems I mentioned? Why is that do you suppose? Maybe because there are tons of problems with it perhaps? Try and think about what you said.

quote:

ORIGINAL: itsSIRtou
well thank u for that question. that tells Me a lot right there. u are clueless.

u've a built-in culture of mistakes.

no wonder u have so many errors to correct.

u don't communicate with ur managers, they don't communicate with the supervisors, they don't communicate with ur workers what ur looking for......and u just accept the errors that result???? SERIOUSLY???

And what's worse u accept that as a means of doing business. WOW........

ur inefficiency is mind blowing....u might as well lose ur money at rumps casino.....at least u'd have SOME fun with that..... maybe u'd get a free nites stay for that.... Ur getting wackier by the moment.....

the Chinese billionaire is starting to look like he knows u by name.....

quote:

ORIGINAL: Nnanji

It's funny, Spanky, you on the lowest rung tecnically how would you know? You still haven't dazzled me with your education. Why don't you say what your education is? I'll tell you mine. I have graduate degrees in engineering and over thirty years of experience. I've done what you were "trained" to do and I've trained plenty of people. What do you have?

it's sad..... u on the reportedly on the top rung "technically", and u DON'T know??

I didn't bother to "dazzle" u. Because I'm not here to dazzle anybody especially someone like u. Hell u probably wasted more money than I've ever made if u are to be believed. rump's casino is waiting to take ur money.

u want to be dazzled? Go watch an xhamster video. That should be setting a high enough bar for u.

I answered the question about my education a long time ago, - go back and read..... Please keep up.

And it makes it even more shameful that a person with ur reported education has a person with my education, from ur own statements, point out serious flaws in your thinking, corporate structure, and company communications with ur employees, - the kind of flaws that were dumped back in the 1940s, not prevalent in a modern company.

And instead ur avoiding the question ....and ur erroneously thinking I'm going to buy into ur fake show of reported business acumen, when it obviously isn't doing ur company any favors anyway, and u basically are poster boy for the OP's Chinese billionaire's assessments of American business waste.

What does it matter to have an education like u reportedly have, when ur company's still in the stone age?

quote:

ORIGINAL: Musicmystery

Ever notice how a few people are endlessly entering conversations proclaiming how smart they are?

Methinks there's a lot of protesting too much going on.

Trying to convince themselves, mainly.

quote:

ORIGINAL: WhoreMods

quote:

ORIGINAL: BoscoX

quote:

ORIGINAL: WhoreMods

quote:

ORIGINAL: BoscoX

quote:

ORIGINAL: WickedsDesire

quote:

ORIGINAL: Nnanji

quote:

ORIGINAL: BoscoX

quote:

ORIGINAL: Nnanji

quote:

ORIGINAL: itsSIRtou

quote:

ORIGINAL: Nnanji

quote:

ORIGINAL: Nnanji

quote:

ORIGINAL: itsSIRtou

quote:

ORIGINAL: Nnanji

quote:

ORIGINAL: itsSIRtou

quote:

ORIGINAL: Nnanji

quote:

ORIGINAL: itsSIRtou

quote:

ORIGINAL: Nnanji

quote:

ORIGINAL: itsSIRtou

quote:

ORIGINAL: InfoMan

quote:

ORIGINAL: itsSIRtou

quote:

ORIGINAL: InfoMan

quote:

ORIGINAL: Musicmystery

Unlike the superior US bridges collapsing from neglect.

Making America Great Again, pre-transportation era.

What bridges have collapsed due to neglect in the US?

here one that did here in Minneapolis,MN http://www.mprnews.org/story/2007/08/02/inspection (written the day after.)

the I-35W bridge into downtown Mpls. collapsed on Aug. 1st, 2007.

more reading.... http://saveourbridges.com/pdfs/TheCollapseofI-35.pdf

https://www.ntsb.gov/investigations/AccidentReports/Reports/HAR0803.pdf

sorry ur full of shit. I wouldn't of had to remind u a damn thing what CAD is capable of if u had a 1/4 the experience ur spewing. even if u managed to have a "staff" u'd know they would have to have a level of technical understanding to relay what u (or ur minions) sent them to the screen for rendering.

on the other hand I guess that makes them smarter than u. If u needed a stress test they would more than u know how to get that accomplished. ur clueless. Thanks for admitting it in ur roundabout way....

u aint that smart... u cant even spell it correctly... now we all know.

Pedal ur shit to someone else, nobody intelligent is buying it. (now watch boss-hoe defend him....LOL)

That's the point Spanky. That's why I'm laughing at you. There are two major problems with CAD drafting. The first is that there is a perception that a mistake is so easy to fix that a lot of mistakes get made. How many times have I seen a cad drafter zoom down to a little area and fix one aspect of a problem while not seeing how it interacts with other aspects of the larger drawing? More times than I have hair on my head is the answer. And that happens a lot because people who do autocadd generally don't know/understand the significance of what they're doing. The second major problem is that people who do autocadd effectively spend their career doing autocadd and getting good at it and not learning about the engineering.

It's funny, I know a lot of people, peers, that can't spell worth a damn because their brains do numbers not letters. I'd like to point out that we who do excel at number don't make fun of people like you who can't do either numbers or letters. We just assume the intellectually lower class will do what they can and we have to check their work. So, don't let spelling make you too much of a smarty pants Spanky.

well then u need to get around a better brand of CAD professionals. And get up outta the dark ages with ur software..... what ya do? buy the child's home version??

The people who have trained Me and others I know that have been in the Automotive and Construction industries who regularly use CAD simply don't have ur issues.

And once again current 2D/3D CAD software doesn't have the issues u report and there's TONS of training on how to avoid it. (even on youtube!!)

In fact now multiple people in different countries can be working on the same CAD drawing in updated real time with multiple views on multiple screens, and not run into ur stated issues.

Seriously what company do u have that u are clueless about this?? u need to find & hire someone in Design Management to get ur company out of the stone age.....

dude u ARE a dinosaur. What's wrong with u that a guy just getting out of college has a better grasp of ur OWN technology capabilities than u do, and ur supposed to be a leader OF ur company??? REALLY???


Don't post to Me ur laughing at Me seriously,

cuz Im not laughing at u anymore man..... ur just sad, and I feel bad for ur employees.

Really? You were trained to be this "good" on a computer? I'd hate to have to communicate with you before your training. But, let's set that aside and ask this question. If you are essentially down on the lowest rung of the technical ladder, how can you know what supervisors are looking at your work for? You don't. I'd also suggest you ask for your money back from "college". Just what subject is your college degree in?

Advanced Leftist Indoctrination Studies - I guarantee you.

I trimmed this some since it was getting pretty long with all of the fertilizer coming from Spanky. I'm betting his degree, if it wasn't some 18-month trade school, was in some sort of minority studies.

can you repeat i didn't understand this one this first 40 times

Not sure what your point is?

Can I add a quotation or to to this? That shrinking perspective is awesome.

By all means!

quote:

ORIGINAL: WhoreMods

quote:

ORIGINAL: WhoreMods

quote:

ORIGINAL: BoscoX

quote:

ORIGINAL: WhoreMods

quote:

ORIGINAL: BoscoX

quote:

ORIGINAL: WickedsDesire

quote:

ORIGINAL: Nnanji

quote:

ORIGINAL: BoscoX

quote:

ORIGINAL: Nnanji

quote:

ORIGINAL: itsSIRtou

quote:

ORIGINAL: Nnanji

quote:

ORIGINAL: Nnanji

quote:

ORIGINAL: itsSIRtou

quote:

ORIGINAL: Nnanji

quote:

ORIGINAL: itsSIRtou

quote:

ORIGINAL: Nnanji

quote:

ORIGINAL: itsSIRtou

quote:

ORIGINAL: Nnanji

quote:

ORIGINAL: itsSIRtou

quote:

ORIGINAL: InfoMan

quote:

ORIGINAL: itsSIRtou

quote:

ORIGINAL: InfoMan

quote:

ORIGINAL: Musicmystery

Unlike the superior US bridges collapsing from neglect.

Making America Great Again, pre-transportation era.

What bridges have collapsed due to neglect in the US?

here one that did here in Minneapolis,MN http://www.mprnews.org/story/2007/08/02/inspection (written the day after.)

the I-35W bridge into downtown Mpls. collapsed on Aug. 1st, 2007.

more reading.... http://saveourbridges.com/pdfs/TheCollapseofI-35.pdf

https://www.ntsb.gov/investigations/AccidentReports/Reports/HAR0803.pdf

sorry ur full of shit. I wouldn't of had to remind u a damn thing what CAD is capable of if u had a 1/4 the experience ur spewing. even if u managed to have a "staff" u'd know they would have to have a level of technical understanding to relay what u (or ur minions) sent them to the screen for rendering.

on the other hand I guess that makes them smarter than u. If u needed a stress test they would more than u know how to get that accomplished. ur clueless. Thanks for admitting it in ur roundabout way....

u aint that smart... u cant even spell it correctly... now we all know.

Pedal ur shit to someone else, nobody intelligent is buying it. (now watch boss-hoe defend him....LOL)

That's the point Spanky. That's why I'm laughing at you. There are two major problems with CAD drafting. The first is that there is a perception that a mistake is so easy to fix that a lot of mistakes get made. How many times have I seen a cad drafter zoom down to a little area and fix one aspect of a problem while not seeing how it interacts with other aspects of the larger drawing? More times than I have hair on my head is the answer. And that happens a lot because people who do autocadd generally don't know/understand the significance of what they're doing. The second major problem is that people who do autocadd effectively spend their career doing autocadd and getting good at it and not learning about the engineering.

It's funny, I know a lot of people, peers, that can't spell worth a damn because their brains do numbers not letters. I'd like to point out that we who do excel at number don't make fun of people like you who can't do either numbers or letters. We just assume the intellectually lower class will do what they can and we have to check their work. So, don't let spelling make you too much of a smarty pants Spanky.

well then u need to get around a better brand of CAD professionals. And get up outta the dark ages with ur software..... what ya do? buy the child's home version??

The people who have trained Me and others I know that have been in the Automotive and Construction industries who regularly use CAD simply don't have ur issues.

And once again current 2D/3D CAD software doesn't have the issues u report and there's TONS of training on how to avoid it. (even on youtube!!)

In fact now multiple people in different countries can be working on the same CAD drawing in updated real time with multiple views on multiple screens, and not run into ur stated issues.

Seriously what company do u have that u are clueless about this?? u need to find & hire someone in Design Management to get ur company out of the stone age.....

dude u ARE a dinosaur. What's wrong with u that a guy just getting out of college has a better grasp of ur OWN technology capabilities than u do, and ur supposed to be a leader OF ur company??? REALLY???


Don't post to Me ur laughing at Me seriously,

cuz Im not laughing at u anymore man..... ur just sad, and I feel bad for ur employees.

Really? You were trained to be this "good" on a computer? I'd hate to have to communicate with you before your training. But, let's set that aside and ask this question. If you are essentially down on the lowest rung of the technical ladder, how can you know what supervisors are looking at your work for? You don't. I'd also suggest you ask for your money back from "college". Just what subject is your college degree in?

Advanced Leftist Indoctrination Studies - I guarantee you.

I trimmed this some since it was getting pretty long with all of the fertilizer coming from Spanky. I'm betting his degree, if it wasn't some 18-month trade school, was in some sort of minority studies.

can you repeat i didn't understand this one this first 40 times

Not sure what your point is?

Can I add a quotation or to to this? That shrinking perspective is awesome.

By all means!

Bump.

quote:

ORIGINAL: Nnanji

quote:

ORIGINAL: itsSIRtou

quote:

ORIGINAL: Nnanji

quote:

ORIGINAL: itsSIRtou

well then u need to get around a better brand of CAD professionals. And get up outta the dark ages with ur software..... what ya do? buy the child's home version??

The people who have trained Me and others I know that have been in the Automotive and Construction industries who regularly use CAD simply don't have ur issues.

And once again current 2D/3D CAD software doesn't have the issues u report and there's TONS of training on how to avoid it. (even on youtube!!)

In fact now multiple people in different countries can be working on the same CAD drawing in updated real time with multiple views on multiple screens, and not run into ur stated issues.

Seriously what company do u have that u are clueless about this?? u need to find & hire someone in Design Management to get ur company out of the stone age.....

dude u ARE a dinosaur. What's wrong with u that a guy just getting out of college has a better grasp of ur OWN technology capabilities than u do, and ur supposed to be a leader OF ur company??? REALLY???


Don't post to Me ur laughing at Me seriously,

cuz Im not laughing at u anymore man..... ur just sad, and I feel bad for ur employees.

quote:

ORIGINAL: Nnanji

Really? There's tons of training on how to avoid the problems I mentioned? Why is that do you suppose? Maybe because there are tons of problems with it perhaps? Try and think about what you said.

quote:

ORIGINAL: itsSIRtou
well thank u for that question. that tells Me a lot right there. u are clueless.

u've a built-in culture of mistakes.

no wonder u have so many errors to correct.

u don't communicate with ur managers, they don't communicate with the supervisors, they don't communicate with ur workers what ur looking for......and u just accept the errors that result???? SERIOUSLY???

And what's worse u accept that as a means of doing business. WOW........

ur inefficiency is mind blowing....u might as well lose ur money at rumps casino.....at least u'd have SOME fun with that..... maybe u'd get a free nites stay for that.... Ur getting wackier by the moment.....

the Chinese billionaire is starting to look like he knows u by name.....

quote:

ORIGINAL: Nnanji

It's funny, Spanky, you on the lowest rung tecnically how would you know? You still haven't dazzled me with your education. Why don't you say what your education is? I'll tell you mine. I have graduate degrees in engineering and over thirty years of experience. I've done what you were "trained" to do and I've trained plenty of people. What do you have?

it's sad..... u on the reportedly on the top rung "technically", and u DON'T know??

I didn't bother to "dazzle" u. Because I'm not here to dazzle anybody especially someone like u. Hell u probably wasted more money than I've ever made if u are to be believed. rump's casino is waiting to take ur money.

u want to be dazzled? Go watch an xhamster video. That should be setting a high enough bar for u.

I answered the question about my education a long time ago, - go back and read..... Please keep up.

And it makes it even more shameful that a person with ur reported education has a person with my education, from ur own statements, point out serious flaws in your thinking, corporate structure, and company communications with ur employees, - the kind of flaws that were dumped back in the 1940s, not prevalent in a modern company.

And instead ur avoiding the question ....and ur erroneously thinking I'm going to buy into ur fake show of reported business acumen, when it obviously isn't doing ur company any favors anyway, and u basically are poster boy for the OP's Chinese billionaire's assessments of American business waste.

What does it matter to have an education like u reportedly have, when ur company's still in the stone age?

I went and looked, you did partially answer my question about your education. You have a degree in "Design Management". Which doesn't even put you on the lowest technical rung of the ladder. Now tell me, was this degree an 18-month course you found listed on a match book cover? W've already seen your telling lies about understanding technical things. So show u the rest of your lies. Really, it was a write in degree you paid for wasn't it?

quote:

ORIGINAL: itsSIRtou

quote:

ORIGINAL: Nnanji

quote:

ORIGINAL: itsSIRtou

quote:

ORIGINAL: Nnanji

quote:

ORIGINAL: itsSIRtou

well then u need to get around a better brand of CAD professionals. And get up outta the dark ages with ur software..... what ya do? buy the child's home version??

The people who have trained Me and others I know that have been in the Automotive and Construction industries who regularly use CAD simply don't have ur issues.

And once again current 2D/3D CAD software doesn't have the issues u report and there's TONS of training on how to avoid it. (even on youtube!!)

In fact now multiple people in different countries can be working on the same CAD drawing in updated real time with multiple views on multiple screens, and not run into ur stated issues.

Seriously what company do u have that u are clueless about this?? u need to find & hire someone in Design Management to get ur company out of the stone age.....

dude u ARE a dinosaur. What's wrong with u that a guy just getting out of college has a better grasp of ur OWN technology capabilities than u do, and ur supposed to be a leader OF ur company??? REALLY???


Don't post to Me ur laughing at Me seriously,

cuz Im not laughing at u anymore man..... ur just sad, and I feel bad for ur employees.

quote:

ORIGINAL: Nnanji

Really? There's tons of training on how to avoid the problems I mentioned? Why is that do you suppose? Maybe because there are tons of problems with it perhaps? Try and think about what you said.

quote:

ORIGINAL: itsSIRtou
well thank u for that question. that tells Me a lot right there. u are clueless.

u've a built-in culture of mistakes.

no wonder u have so many errors to correct.

u don't communicate with ur managers, they don't communicate with the supervisors, they don't communicate with ur workers what ur looking for......and u just accept the errors that result???? SERIOUSLY???

And what's worse u accept that as a means of doing business. WOW........

ur inefficiency is mind blowing....u might as well lose ur money at rumps casino.....at least u'd have SOME fun with that..... maybe u'd get a free nites stay for that.... Ur getting wackier by the moment.....

the Chinese billionaire is starting to look like he knows u by name.....

quote:

ORIGINAL: Nnanji

It's funny, Spanky, you on the lowest rung tecnically how would you know? You still haven't dazzled me with your education. Why don't you say what your education is? I'll tell you mine. I have graduate degrees in engineering and over thirty years of experience. I've done what you were "trained" to do and I've trained plenty of people. What do you have?

it's sad..... u on the reportedly on the top rung "technically", and u DON'T know??

I didn't bother to "dazzle" u. Because I'm not here to dazzle anybody especially someone like u. Hell u probably wasted more money than I've ever made if u are to be believed. rump's casino is waiting to take ur money.

u want to be dazzled? Go watch an xhamster video. That should be setting a high enough bar for u.

I answered the question about my education a long time ago, - go back and read..... Please keep up.

And it makes it even more shameful that a person with ur reported education has a person with my education, from ur own statements, point out serious flaws in your thinking, corporate structure, and company communications with ur employees, - the kind of flaws that were dumped back in the 1940s, not prevalent in a modern company.

And instead ur avoiding the question ....and ur erroneously thinking I'm going to buy into ur fake show of reported business acumen, when it obviously isn't doing ur company any favors anyway, and u basically are poster boy for the OP's Chinese billionaire's assessments of American business waste.

What does it matter to have an education like u reportedly have, when ur company's still in the stone age?

I went and looked, you did partially answer my question about your education. You have a degree in "Design Management". Which doesn't even put you on the lowest technical rung of the ladder. Now tell me, was this degree an 18-month course you found listed on a match book cover? W've already seen your telling lies about understanding technical things. So show u the rest of your lies. Really, it was a write in degree you paid for wasn't it?

if u had really read it, u'd know better what My DM Degree is about

so, let Me get this straight,...... u wrote all that to avoid answering the question of why ur MANAGEMENT style sucks dead elephant ass??

u are going off on this latest tangent to NOT answer why u don't let the people u apparently are most contemptuous of, - ur employees, know what's expected of them and cant figure out why they make the mistakes u obviously bitch about???? Here, let Me rephrase a statement for u.

(WARNING: sarcasm alert!!)

OH GREAT TECHINCAL OZ! step away from ur smoke & mirror machine please grace Me with an audience of ur technical wizzing....

How is it that THE technical god of the universe with ur reported VASTLY SUPERIOR & WISER education has a person with My comparably lowly & insignificant education, from ur own most high from the mountain of knowledge statements, point out serious flaws in your most exalted thinking, corporate structure, and company communications with ur most contemptuous slaves,...er, I mean employees, - the kind of flaws that were dumped back in the 1940s, not prevalent in a modern company.