SirKenin -> RE: Building a New PC (7/7/2005 3:05:27 PM)
|
quote:
ORIGINAL: anthrosub Thanks guys. I've replaced components in the past and have lots of experience with software, so I think I'll be okay. Just want to be sure about the parts and not fry anything in the process! anthrosub A couple of quick pointers on how not to be stupid: Touch the case before you touch a component Make sure the components are firmly seated Make certain the notches in the RAM are lined up with the dimples on the mainboard BEFORE trying to force them in or powering up the system. Otherwise you will either fry the RAM or send a feedback signal through the board, blowing up the memory controller or worse. The red stripe on the harddrive ribbon goes towards the power plug and lines up with the arrow or "1" on the mainboard. The stripe on the floppy ribbon can go either way depending on the floppy drive.\ Put the optical drives on a separate controller from your harddrives. Do not force power connectors in. They are fairly easy to plug in. If not, chances are they are upside down. Make absolutely certain the protective cover is taken off the heatsink/fan combo before you attempt to apply it to the CPU. Better yet, scrape all that crap off and put a VERY thin layer of thermal paste on the CPU. Make sure the HSF is firmly seated. Do not buy an AMD unless it is an Athlon XP. Do not buy ANY AMD if one of the major tasks is multitasking. AMD can not multitask worth a damn. That is where they are infamous for puking. They can play a few more FPS in games, but who gives a damn? You can not notice the increased FPS while playing anyways. Make sure you have adequate ventalation. This means two exhaust fans on the back and at least one intake on the front. Harddrives can make a HUGE difference in your computer's performance. You would be wise to investigate your options before assuming that it will not affect your performance. Make sure you are using Windows XP with Service Pack 2 and all the updates. Do not buy ANY of the FX series of nVIDIA cards. They are all garbage. They have to ramp back in DirectX 9 games because of a fatal design flaw. nVIDIA has admitted they blew it big time and have made the appropriate changes in their 6xxx series cards. Video card memory is NOT the be all end all. More memory does not automatically equate to a better card. I have two ATi 128MB video cards (one in My server, one in one of My workstations) that will blow away the entire FX series of video cards and several of the ATi 256MB cards. The thing to look for is a strong GPU, and a good place to start is the number of pipelines, pixel shaders, vertex shaders, etc. Look for dual channel DDR or DDR 2 for much higher bandwith than regular DDR. Stay the hell away from VIA or SiS chipsets. They are absolute crap and a serious dog when it comes to performance. Look for either nFORCE or Intel chipsets. There are a couple of doggy and buggy Intel chipsets as well, so be careful. Some nFORCE 4 boards can be a little quirky as well. That should get you started anyways.
|
|
|
|